Geschäftsführender Vorstand
E-Mail: s.kaierle@lzh.deTelefon: +49 511 2788-114
Kurzbiographie
Studium der Elektrotechnik an der RWTH Aachen, Abschluss als Diplom-Ingenieur. 1999 Promotion zum Dr.-Ing. an der RWTH Aachen, Fakultät für Maschinenwesen.
Von 1998 bis 2011 Leitung der Abteilung Systemtechnik am Fraunhofer Institut für Lasertechnik in Aachen, von 2012 bis 2018 Leitung der Abteilung Werkstoff- und Prozesstechnik am Laser Zentrum Hannover e.V.
2018 wurde Prof. Dr.-Ing. Stefan Kaierle zum Geschäftsführenden Vorstand des LZH berufen.
In einem gemeinsamen Berufungsverfahren der Leibniz Universität Hannover (LUH) und des LZH wurde Prof. Dr.-Ing. Stefan Kaierle 2021 zum Universitätsprofessor für Generative Laserprozesstechnik berufen.
Hauptforschungsgebiete
- Lasermaterialbearbeitung (Additive Fertigung, Fügen, Trennen, Oberflächentechnik, generative Verfahren, Hybridverfahren, Mikroschweißen, Bohren)
- Laserprozessüberwachung und –simulation
- Lasersystemtechnik, Lasersicherheitstechnik
Vorlesungen
- Vorlesung mit Übung „Laserbasierte additive Fertigung“
Leibniz Universität Hannover - Vorlesung mit Übung „Laser in der Biomedizintechnik“
Leibniz Universität Hannover
Anderes berufliches Engagement
- Mitglied im Board of Stakeholders der European Technology Platform Photonics21 seit 2014
- Mitglied im Board of Trustees des Laser Institute of America (LIA) 2013 - 2021
- Founding Executive Editor-in-Chief des SPRINGER NATURE Journal Light: Science & Applications seit 2011
- Symposium Chair der Photonics West LASE Conference seit 2021
- General Chair des International Congress on Applications of Lasers & Electro-Optics (ICALEO®) 2013 und 2014
- Vorstandsvorsitzender des European Laser Institute (ELI) 2003-2013
- Fellow des European Laser Institute (ELI) 2013
- Fellow des Laser Institute of America (LIA) 2012
- Ehrenprofessur am CIOMP - Chinese Academy of Sciences (CAS, China) 2012
- Gastprofessur an der Changchun University of Science and Technology (CUST, China) 2005
- Gastprofessur an der Beijing University of Technology (BUT, China) 2007
- Mitglied im Clausthaler Zentrum für Materialtechnik
- Mitglied im Exzellenzcluster PhoenixD
- Mitglied in den Sonderforschungsbereichen 871, 1153 und 1368
LZH-Veröffentlichungen
Zeitschriftenaufsatz (reviewed) (212)
Additive Manufacturing of Ti-6Al-4V with laser-wire DED and local shielding gas protection
Procedia CIRP
Vol. 124
254-256
2024
Welding between confinements as a new approach for high deposition rate additive manufacturing with laser-assisted double wire welding with nontransferred arc
Journal of Laser Applications
1
36
2024
Ultrasonic levitation as containerless handling for in-space manufacturing
SPIE Proceedings Volume 13005, Laser + Photonics for Advanced Manufacturing
13.005
Vol. 13005
2024
Investigation of laser wire bonding for the fabrication of tensegrity structures
Procedia CIRP
Vol. 124
388-393
2024
Laser remelting of regolith in vacuum: Reducing porosity for enhanced lunar resource utilization
Procedia CIRP
Vol. 124
494-498
2024
Oxygen-free production: Influence of silane-doped atmosphere on porosity and mechanical properties of Ti-6Al-4V processed by PBF-LB
Procedia CIRP
Vol. 124
110-113
2024
Temporal power modulation in high power laser beam welding of round bars
Procedia CIRP
124
2024
438-441
2024
Characterization of laser-induced surface structures of aluminum in an oxygen-free atmosphere
Procedia CIRP
Vol. 124
684-687
2024
Deep penetration welding of brass with subsequent wire filling process by laser beam with combined core and ring beam
Procedia CIRP
Vol. 124
399-402
2024
Laser Glass deposition of single-mode glass fibers for the fabrication of chip-scale photonic circuits
Procedia CIRP
Vol. 124
484-488
2024
Particulate matter during Ultrashort-Pulse Laser (USPL) processing
Procedia CIRP
Vol. 124
692-695
2024
A small volume, local shielding gas chamber with low gas consumption for Laser Wire Additive Manufacturing of bigger titanium parts
Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference
2023
Novel welding strategy in high deposition rate laser-assisted double-wire welding with nontransferred arc
Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference
2023
Integration of Bragg gratings in aerosol-jetted polymer optical waveguides for strain monitoring capabilities
Optics Letters
7
48
1778
2023
Application of the ABA cladding technique to a wire based laser cladding process
Journal of Laser Applications
4
35
042043
2023
Process-integrated alloy adjustment in laser deposition welding with two wires
Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference
2023
Influence of process parameters on single weld seam geometry and process stability in Laser Hot-Wire Cladding of AISI 52100
Advances in Industrial and Manufacturing Engineering
7
100122
2023
Investigation of the joining area of additive manufactured glass structures on flat glass
Proceedings Glass Performance Days (GPD)
2023
Sensitivity of process signals to deviations in material distribution and material properties of hybrid workpieces
Int. J. Adv. Manuf. Tech.
2023
Using Fiber or Rod - The influence of different filler materials during CO2 laser welding of quartz glass
Journal of Laser Applications
35
042027
2023
Entwicklung von Prozessparametereinstellungen für das Laserstrahlschmelzen von Regolith unter Vakuum
Tagungsband 5. Symposium Materialtechnik
2023
Influence of Silane-doped Argon Processing Atmosphere on Powder Recycling and Part Properties in L PBF of Ti-6Al-4V
Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference
2023
Laser-Based Powder Bed Fusion of Ti-6Al-4V Structures with Different Surface-Area-to-Volume Ratios in Oxygen-Reduced and Oxygen-Free Environment
Tagungsband 5. Symposium Materialtechnik
2023
Towards experimental process parameter development for Ti-6Al-4V TPMS lattice structures with application to small scale dental implants using micrographs
Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference
2023
Flussmittelfreies Laserstrahlhartlöten von Aluminiumlegierungen unter sauerstofffreier Atmosphäre
Tagungsband 5. Symposium Materialtechnik
2023
Investigations on improving the properties of laser beam welded thick dissimilar joints of steel and aluminum by using filler material
Journal of Laser Applications
4
35
042011
2023
Laser beam welding of brass with combined core and ring beam
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2023
Laser beam welding of brass with combined core and ring beam
Journal of Laser Applications
4
35
2023
Feasibility study for the manufacturing of hybrid pinion shafts with the cross-wedge rolling process
Int. J. Mater. Form.
45
16
2023
Investigations on laser beam welding of thin aluminum foils with additional filler wire
Journal of Laser Applications
4
35
2023
Feasibility study on multifrequency excitation of the melt pool during ultrasonic-assisted laser beam welding
Ultrasonics
131
106954
2023
Einkristalline Reparatur von rissähnlichen Strukturen auf einkristallinen Hochdruck-Deckbändern
Tagungsband 5. Symposium Materialtechnik
2023
Intermixing behavior of 1.4430 stainless steel and 1.4718 valve steel in in situ alloying using coaxial laser double-wire laser directed energy deposition
Journal of Laser Applications
1
35
012019
2023
Towards Integrated Optical Systems with Glass-based Additive Manufacturing by Laser Glass Deposition
Proc. Lasers in Manufacturing (LiM)
2023
Advances in powder bed based Additive Manufacturing of metal-glass-hybrid-components
Procedia CIRP
111
111-114
2022
Laser beam brazing of aluminum alloys in XHV-adequate atmosphere with surface deoxidation by ns-pulsed laser radiation
Journal of Laser Applications
2
34
022005
2022
ProKleb - Alterungsverhalten der Klebung von unterschiedlich kontaminiertem, glasfaserverstärktem PA6 nach Laserstrahlbehandlung
Joining Plastics - Fügen von Kunststoffen
2
16
108-114
2022
Influence of the laser position in laser-assisted WAAM process on weld bead shape and surface properties
Procedia CIRP
111
190-195
2022
High deposition rate welding with a laser line optics with the laser-assisted double-wire deposition welding process with nontransferred arc
Journal of Laser Applications
4
34
042010
2022
Influence of laser spot oscillation parameters on the seam geometry and dilution in the LDNA process
Procedia CIRP
111
185-189
2022
Laser Metal Deposition welding with high carbon steel wire material 100Cr6
Procedia CIRP
111
224-227
2022
Large-scale CO2 laser-based sol-gel annealing of titanium dioxide on borosilicate glass
Procedia CIRP
111
701-704
2022
Development of an empirical process model for adjusted porosity in laser-based powder bed fusion of Ti-6Al-4V
The International Journal of Advanced Manufacturing Technology
1239-1254
2022
Residual oxygen content and powder recycling: effects on microstructure and mechanical properties of additively manufactured Ti-6Al-4V parts
Int. J. Adv. Manuf. Tech.
121
3685-3701
2022
Determination of optimum process parameters for different Ti-6Al-4V powders processed by Laser-based Powder Bed Fusion
Procedia CIRP
111
134-137
2022
Laser-based powder bed fusion of Ti-6Al-4V powder modified with SiO2 nanoparticles
Int. J. Adv. Manuf. Tech.
3-4
122
1679-1694
2022
Investigations on the effect of standing ultrasonic waves on the microstructure and hardness of laser beam welded butt joints of stainless steel and nickel base alloy
Journal of Laser Applications
4
34
042014
2022
Investigations on the Specifics of Laser Power Modulation in Laser Beam Welding of Round Bars
Lasers in Manufacturing and Materials Processing
9
469-480
2022
Emission of scattered radiation from the process zone of welding processes using high-power diode lasers
Procedia CIRP
111
864-869
2022
Macroscopic simulation model for laser cutting of carbon fibre reinforced plastics
Procedia CIRP
111
496-500
2022
Expert system-supported optimization of laser welding of additively manufactured thermoplastic components
Procedia CIRP
111
470-474
2022
Enabling laser transmission welding of additively manufactured thermoplastic parts using an expert system based on neural networks
Journal of Laser Applications
4
34
042022
2022
Laser Beam Welding of Thin Foils of Copper and Aluminum Using Different Laser Beam Sources Regarding Weld Seam Quality
Proceedings of the International Congress on Applications of Lasers & Electro-Optics (ICALEO®)
Macro 202
2022
Investigations on laser beam welding of thin foils of copper and aluminum regarding weld seam quality using different laser beam sources
Journal of Laser Applications
4
34
042011
2022
Deep Learning-Based Weld Contour and Defect Detection from Micrographs of Laser Beam Welded Semi-Finished Products
Applied Sciences
9
12
4645
2022
Multivariate parametric study on laser beam welding of copper lap joints using adjustable intensity profiles
Procedia CIRP
111
415-419
2022
Single-crystal repair of high-pressure single-crystal turbine blades for industrial conditions
Procedia CIRP
111
233-236
2022
Direction dependency in coaxial laser double wire Direct Energy Deposition
Procedia CIRP
111
196-200
2022
Investigations on laser beam welding of thick steel plates using a high-power diode laser beam source
Journal of Laser Applications
4
34
042031
2022
Laser Beam Welding of Thick Steel Plates Using a High-Power Diode Laser Beam Source
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
Macro 302
2022
CO2 laser based welding of borosilicate glass by Laser Glass Deposition
Procedia CIRP
111
466-469
2022
Laser microdrilling of CFRP with a nanosecond-pulsed high-power laser
Journal of Laser Applications
4
34
042028
2022
Discoloration of AISI 420 stainless steel in dependence of inter layer time during Laser-based Powder Bed Fusion
Procedia CIRP
111
144-147
2022
Design of additively manufacturable injection molds with conformal cooling
Procedia CIRP
111
97-100
2022
Influence on the optical performance of droplets and enclosures in printed polymer optical waveguides
SPIE Proceedings Vol. 11680, Physics and Simulation of Optoelectronic Devices XXIX
1168009
2021
Influence of degree of deformation on welding pore reduction in high-carbon steels
Production Engineering Research and Development
1
15
161-168
2021
Entwicklung einer intelligenten Prozessüberwachung und Regelung zum Laserauftragschweißen von Multimaterial-Verbindungen
Tagungsband 4. Symposium Materialtechnik
2021
Joining of thermoplastic carbon fiber reinforced plastic laminates by selective heat input during laser cutting
Journal of Laser Applications
33
022011
2021
Influence of the laser beam parameters in the laser assisted double wire welding with nontransferred arc process on the seam geometry of generatively manufactured structures
Journal of Laser Applications
4
33
042044
2021
Individualised and controlled laser beam pre-treatment process for adhesive bonding of fibre-reinforced plastics - part II: Automatic laser process control by spectrometry
Journal of Laser Applications
1
33
012004
2021
Individualized and controlled laser beam pre-treatment process for adhesive bonding of fiber-reinforced plastics. III. Effects of contaminants
Journal of Laser Applications
4
33
042051
2021
PBF-LB/M process under a silane-doped argon atmosphere: Preliminary studies and development of an innovative machine concept
Advances in Industrial and Manufacturing Engineering
2
100040
2021
Residual oxygen content and powder recycling: Effects on surface roughness and porosity of additively manufactured Ti-6Al-4V
Additive Manufacturing
56
102093
2021
Hyperspectral imaging for prediction of surface roughness in laser powder bed fusion
The International Journal of Advanced Manufacturing Technology
5
115
1249-1258
2021
Influence of process-related heat accumulation of laser beam welded 1.7035 round bars on weld pool shape and weld defects
Journal of Laser Applications
042007
33
1-8
2021
Laser-based powder bed fusion of niobium with different build-up rates
The International Journal of Advanced Manufacturing Technology
1
114
305-317
2021
Eddy Current Detection of Laser-Dispersed Markers as a New Approach to Determining the Position of Load Supporting Means
Journal of Laser Applications
4
33
42004
2021
Stoffbelastungen bei der additiven Fertigung mit Pulverbettverfahren
Gefahrstoffe – Reinhaltung der Luft
1
81
53-59
2021
Automatically controlled laser-based welding process for repair of CFRP parts
Journal of Laser Applications
1
34
012006
2021
Assessment of steel shields for protection against laser radiation
Journal of Laser Applications
4
33
042053
2021
Investigations on high-power laser beam-submerged arc hybrid welding of thick duplex stainless steel using laser beam wobbling
Journal of Laser Applications
4
33
042039
2021
Förderung von stabförmigen Schweißzusatzstoffen für das koaxiale Laserauftragschweißen von Glas- und Metallwerkstoffen
Tagungsband 4. Symposium Materialtechnik
12-27
2021
Investigations on the weld metal composition and associated weld metal cracking in laser beam welded steel copper dissimilar joints
J. Mater. Process. Tech.
296
117178
2021
Investigations on laser welding of dissimilar joints of stainless steel and copper for hot crack prevention
Journal of Laser Applications
4
33
042042
2021
Material loss analysis in glass additive manufacturing by laser glass deposition
Journal of Laser Applications
4
33
042050
2021
Laser-induced forward transfer as a potential alternative to pick-and-place technology when assembling semiconductor components
Journal of Laser Applications
4
33
042030
2021
Defect detection in additive manufacturing via a toolpath overlaid melt-pool-temperature tomography
Journal of Laser Applications
32
022055
2020
Generation of Laser-Induced Periodic Surface Structures on Different Glasses by a Picosecond-Pulsed Laser
Procedia CIRP
94
924-929
2020
Additive manufacturing of metal-bonded grinding tools
Int. J. Adv. Manuf. Tech.
5
107
2387-2395
2020
Homogeneous annealing of TiO2, ZrO2 and ITO sol-gel layers with CO2 laser
Procedia CIRP
94
905-909
2020
Individualized and Controlled Laser Beam Pre-treatment Process for Adhesive Bonding of Fiber-Reinforced Plastics - Part II: Automatic Laser Process Control by Spectrometry
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2020
A study of the effects of NIR laser radiation on interlaminar fracture toughness of CFRP
Procedia CIRP
94
895-900
2020
Double pulse laser induced breakdown spectroscopy at 600 bar water pressure
Procedia CIRP
94
791-795
2020
Laser Powder Bed Fusion of NdFeB and influence of heat treatment on microstructure and crack development
Procedia CIRP
94
211-216
2020
Snapshot hyperspectral imaging for quality assurance in Laser Powder Bed Fusion
Procedia CIRP
94
25-28
2020
Investigations on pulsed laser beam welding of thin steel sheets in lap configuration over the face side/parallel joint
Procedia CIRP
94
680-685
2020
Thermoforming of planar polymer optical waveguides for integrated optics in smart packaging materials
J. Mater. Process. Tech.
285
116763
2020
Comparison of SLOT and µCT Investigation of 3D Printed Polymer Parts for Quality Assurance
Journal of Laser Applications
32
022051
2020
Numerical Simulation and Experimental Validation of the Cladding Material Distribution of Hybrid Semi-Finished Products Produced by Deposition Welding and Cross-Wedge Rolling
Metals - Special Issue {\textquotedbl}Hybrid Bulk Metal Components{\textquotedbl}
10
1336
2020
Laser Transmission Welding of Additive Manufactured Parts: Process Modifications to Reduce Cavities Inside the Weld Seam
Procedia CIRP
94
139-143
2020
Advantages of adjustable intensity profiles for laser beam welding of steel copper dissimilar joints
Procedia CIRP
94
661-665
2020
Surface functionalization of flexographic printing forms using a femtosecond laser for adjustable material transfer in MID prod
SPIE Proceedings Vol. 11267: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXV
112670F
2020
Characterization and Functionalization of Flexographic Printing Forms for an Additive Manufacturing Process of Polymer Optical Waveguides
Journal of Laser Applications
33
012017
2020
Improving the mechanical properties of laser beam welded hybrid workpieces by deformation processing
AIP Conference Proceedings
2113
040025
2019
Demonstration of a mobile laser cutting system for complex rescue operations
Journal of Laser Applications
31
022209-1 - 022209-8
2019
Demonstration of a mobile laser cutting system for complex rescue operations
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
37
10
2019
Automatic control for laser-based repair preparation of composites by fiber orientation detection and short coherent interferometry
Journal of Laser Applications
2
31
022204
2019
Process controller for scanning laser surface machining on cylinder surfaces
Proc. Lasers in Manufacturing (LiM)
348
2019
Multimaterial bathless stereolithography using aerosol jet printing and UV laser based polymerization
Journal of Laser Applications
31
2019
022301-1 - 022301-5
2019
Model-based curing depth control of aerosol jet stereolithography
J. Photopolym. Sci. Tec.
2
32
217-221
2019
Development of a laser ablation process model and a disposable 3D-printed tool head for weakening thick steel sheets for the deflagration of hazardous substances
CIRP Journal of Manufacturing Science and Technology
26
94-99
2019
Investigations on in-process control of penetration depth for high-power laser welding of thick steel-aluminum joints
Journal of Laser Applications
2
31
022418-1 - 022418-7
2019
Manipulating the melt propagation of short arc gas metal arc welding with diode lasers <1 kW for improvement in flexibility and process robustness
Journal of Laser Applications
2
31
022417
2019
Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser beam welded aluminum alloy
Journal of Laser Applications
2
31
022402
2019
High precision laser macrodrilling of carbon fiber reinforced plastics with a new nanosecond pulsed laser—Optimized toward industrial needs
Journal of Laser Applications
2
31
022207
2019
Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction welding
IOP Conference Series: Materials Science and Engineering
461
012049
2018
Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts
Int. J. Mater. Form.
6
11
829-837
2018
Robot based remote laser cutting of three-dimensional automotive composite parts with thicknesses up to 5mm
Procedia CIRP
74
417-420
2018
Automatic control for laser-based repair preparation of composites by fibre orientation detection and short coherent interferometry
Proc. International Congress on Applications of Lasers & Electro{\hbox-}Optics ICALEO
2018
Online laser-based repair preparation of CFRP supported by short coherent interferometry
10th CRIP Conference on Photonic Technologies LANE 2018
11240
2018
Selective Laser Melting for processing of regolith in support of a lunar base
Journal of Laser Applications
3
30
032018
2018
Laser beam ablation of thick steel plates without affecting the material underneath
SPIE Proceedings Vol. 10525: High-Power Laser Materials Processing
105250I
2018
Weakening of thick steel plates by laser radiation for the removal of hazardous substances
Procedia CIRP
74
425-429
2018
High precision laser macro-drilling of CFRP with a new nanosecond pulsed laser – optimized towards industrial needs
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2018
1102
2018
Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser
Journal of Laser Applications
3
30
032422-1 - 032422-6
2018
Manipulating the melt propagation of short arc GMAW with diode lasers < 1 kw for improvement in flexibility and process robustness
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2018
Improving weld bead homogeneity in short arc GMAW processes applying low power diode lasers
Procedia CIRP
74
765-769
2018
Efficient air flow control for remote laser beam welding
Journal of Laser Applications
3
30
032413-1 - 0324113-8
2018
Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloy
Proceedings of the International Congress on Applications of Lasers & Electro-Optics (ICALEO®)
404
2018
Laser beam joining of dissimilar joints of steel and aluminium alloy
Welding and Cutting
5
17
392-398
2018
Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects
Journal of Laser Applications
3
30
032417-1 - 032417-6
2018
Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings
Journal of Laser Applications
3
30
032404-1 - 032404-5
2018
Additive manufacturing of glass: CO2-Laser glass deposition printing
Procedia CIRP
74
2018
272-275
2018
Inhalation exposure to hazardous substances during powder-bed processes
Procedia CIRP
74
295-299
2018
Evaluation of Material Based Influences at Laser Based Heat Conduction Welding of CFRP
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2018
Temperature distribution during laser based heat conduction welding of CFRP
Procedia CIRP
74
553-556
2018
Oberflächenkonditionierung zur Erhöhung der Effizienz des Dauerstrich-Laserstrahlmikroschweißens von Kupferwerkstoffen
Schweissen und Schneiden
8
69
492-496
2017
Chip bonding of low-melting eutectic alloys by transmitted laser radiation
Advanced Optical Technologies
3-4
6
311-317
2017
Single-crystal turbine blade tip repair by laser cladding and remelting
CIRP Journal of Manufacturing Science and Technology
19
196-199
2017
Laser Welding of Dissimilar Joints of Steel and Aluminum for Ship Applications Using a High-Power Diode Laser
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
1505
2017
Investigations on underwater laser cutting for decommissioning of marine constructions
Proc. Conference on Maritime Energy 2017 – Decommissioning of Offshore Geotechnical Structures
129-137
2017
Efficient air flow control for remote laser beam welding
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
703
2017
Influence of Silicon on the Structure And Weldability of Steel-Aluminium Joints Processed by Non-Vacuum Electron Beam Welding
International Journal of Emerging Technology and Advanced Engineering
9
7
348-356
2017
Influence of beam position and ultrasonic amplitude on the micro-structure of laser welded dissimilar steel-steel joints
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
1503
2017
Laser Beam Welding of Ku Band Waveguides for Communication Satellites
Proc. International Microwave and Optoelectronics Conference (IMOC)
2017
Laser Cladding for Crack Repair of CMSX-4 Single-Crystalline Turbine Parts
Lasers in Manufacturing and Materials Processing
1
4
13-23
2017
Turbine blade tip single crystalline clad deposition with applied remelting passes for well oriented volume extension
Journal of Laser Applications
2
29
022310
2017
Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction
Journal of Laser Applications
2
29
022414
2017
Investigations on Remote Laser Beam Welding of Dissimilar Joints of X5CrNi18-10 and AA6082-T6 for Battery Housings
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
P109
2017
Evaluation of the laser assisted double wire with nontransferred arc surfacing process for cladding
Journal of Laser Applications
2
28
022306
2016
Influence of Laser Power on the Shape of single Tracks in Scanner based Laser Wire Cladding
Physics Procedia
83
667-673
2016
Influence of scan width and wire feed speed on seam geometry and the substrate surface in laser wire cladding
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2016
Repairing parts from nickel base material alloy by laser cladding and ball end milling
Journal of Production Engineering Research and Development
4
10
433-441
2016
Significance of the resonance condition for controlling the seam position in laser-assisted TIG welding
Physics Procedia
83
568-576
2016
Challenges of Processing Magnesium and Magnesium Alloys by Selective Laser Melting
Proc. World PM2016
2016
Conditioning of copper material surfaces increasing the efficiency of continuous wave laser microwelding
CIRP Journal of Manufacturing Science and Technology
14
66-70
2016
Studies on the Robustness of Underwater Laser Cutting of S355J2+N Using a Yb:YAG Disk Laser Source
Physics Procedia
83
310-316
2016
Laser Soldering and Brazing of Steel-aluminum Sheets for Tailored Hybrid Tubes
Journal of Laser Applications
2
28
022429
2016
Turbine blade tip single crystalline clad deposition with applied remelting passes for well oriented volume extension
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2016
Remote Laser Beam Welding of Different, Dissimilar Steel and Aluminum Alloys with Varying Sheet Thicknesses for Automotive Lightweight Construction
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
801
2016
Laser Processing of Carbon Fiber Reinforced Plastics – Release of Carbon Fiber Segments During Short-pulsed Laser Processing of CFRP
Physics Procedia
83
1021-1030
2016
Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels
Journal of Laser Applications
S2
27
290061-290066
2015
Identification of the zinc dispersion in rubber blends by libs with a Nd:YAG laser
Chinese Optics
4
8
596-602
2015
Emissionen bei der Laserstrahlbearbeitung von Kunststoffen
Joining Plastics - Fügen von Kunststoffen
3-4
9
195-203
2015
In Situ Observation of Solidification Conditions in Pulsed Laser Welding of AL6082 Aluminum Alloys to Evaluate Their Impact on Hot Cracking Susceptibility
Metallurgican and Materials Transactions A
4
46
1678-1688
2015
Using pulse shaping to control temporal strain development and solidification cracking in pulsed laser welding of 6082 aluminum alloys
J. Mater. Process. Tech. (Journal of Materials Processing Technology)
225
162-169
2015
Influence of the Laser and its Scan Width in the LDNA Surfacing Process
Physics Procedia
56
204-210
2014
Selektives Laser Mikro Schmelzen von Platin-Iridium Legierungen
RTejournal - Forum für Rapid Technologie
11
1-7
2014
Influence of Welding Current and Focal Position on the Resonant Absorption of Laser Radiation in a TIG Welding Arc
Physics Procedia
56
646-652
2014
Benefits of Optogalvanic Effect and Beam Shaping for Laser Stabilized GMA Welding
Chinese Optics
1
7
112-117
2014
GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating
Physics Procedia
56
637-645
2014
Crack Repair of Single Crystal Turbine Blades Using Laser Cladding Technology
Procedia CIRP
1
22
263-267
2014
Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources
Journal of Laser Applications
4
26
042005
2014
Double pulse laser welding of 6082 aluminium alloys
Science and Technology of Welding and Joining
1
20
42-47
2014
Laser cutting of carbon fiber reinforced plastics – investigation of hazardous process emissions
Physics Procedia
56
1153-1164
2014
Additive Manufacturing of Vascular Implants by Selective Laser Melting
Biomedical Engineering / Biomedizinische Technik
S1
59
S401-S404
2014
Basic study on the process combination of deposition welding and subsequent hot bulk forming
Production Engineering
6
7
585-591
2013
Investigation on a new process chain of deposition or friction welding and subsequent hot forging
Materialwissenschaft und Werkstofftechnik
9
44
783-789
2013
Passive and active protective clothing against high-power laser radiation
Physics Procedia
41
291-301
2013
Passive and active protective clothing against laser radiation
Journal of Laser Applications
4
25
042003-1 - 042003-8
2013
Development of a hollow laser beam for micromachining
Advanced Optical Technologies
5
1
365-370
2012
Functional Coatings of Sol-Gel on Glass Substrate Using CO2 Laser Irradiation
ScienceDirect - Elsevier
74
2018
386-389
Zeitschriftenaufsatz (non-reviewed) (143)
Re-use – Laser Cutting of Semi-finishedThermoplastic CFRP Parts for Better Resource Efficiency
Proceedings of the 7th International Conference & Exhibition on Thermoplastic Composites (ITHEC)
7
175-178
2024
Prozessstabilisierung beim Laserstrahlschweißen von Rundstangen unten Anregung durch Ultraschall
Tagungsband 24. Umformtechnisches Kolloquium Hannover
45-46
2024
Quality-assured laser transmission welding of additively manufactured components with the support of an expert system
Proc. SPIE 12878, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XIII
1287808
2024
Thermal evaluation of a laser microdrilling process for thin CFRP-laminates
Proc. SPIE 12878, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XIII
128780H
2024
Charakterisierung von Partikelemissionen bei der Materialbearbeitung mit Ultrakurzpulslasern
Tagungsband Experimentelle Strömungsmechanik
2024
Additive multimaterial 3D-structures
SPIE Proceeding Vol. 12412, Laser 3D Manufacturing X
27-30
2023
Additive Fertigung großskaliger Produkte - Entwicklung einer Anlage zum Auftragschweißen im XXL-Format
GIESSEREI - Die Zeitschrift für Technik, Innovation und Management
11
38-40
2023
Seam geometry manipulation by oscillation amplitude adjustment in the LDNA process
SPIE Proceeding Vol. 12414, High-Power Laser Materials Processing
90-96
2023
Laser Cutting of Semi-Finished CFRTP Products for Better Resource Efficiency
Proceedings of the 42nd International Congress on Applications of Lasers and Electro-Optics (ICALEO)
2023
Mosquito-dispensed waveguides in cavities on 3D-MIDs
International Congress Mechatronic Integration Discourse (MID)
2023
Selektive und chemiefreie Unkrautregulierung mittels KI-geführter Laserstrahlung
sis - sicher ist sicher
6
287-292
2023
Finite Element Simulation of Process Temperatures During Laser Based Cutting of Unidirectional CFRP and Evaluation of Heat Affected Zone
Proceedings of the Sampe Europe Conference
2023
Joining of Duplex Stainless Steels Using High-Power Laser Beam-Submerged Arc Hybrid Welding
Proceedings of the European Steel Technology and Application Days (ESTAD)
2023
Improving the Properties of Laser Beam Welded Thick Dissimilar Joints of Steel and Aluminum by Using Filler Material
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2023
The MOONRISE-payload as proof of principle for mobile selective laser melting of lunar regolith
SPIE Proceedings Vol. 12777, International Conference on Space Optics
127776E
2023
Investigations on laser beam welding of thin aluminum foils with additional filler wire
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2023
Acousto-optic pulse-selective laser beam deflection for micromachining with ultrashort pulsed lasers
Proc. Lasers in Manufacturing (LiM)
2023
Acousto-optic pulse-selective laser beam deflection for micromachining with ultrashort pulsed lasers
Proc. Lasers in Manufacturing (LiM)
2023
Material efficient production of functionally graded materials using coaxial laser double-wire directed energy deposition
Proc. SPIE 12414, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII
2023
Bewertung der Untersuchungen zu den Gefahren und zur Toxikologie von Faserbruchstücken beim Laserstrahltrennen von Faserverbundkunststoffen
Proceedings der 30. Fachtagung „Experimentelle Strömungsmechanik“
2023
Development of innovative laser based processes for the aerospace industry
Proceedings of the Laser Processing for Industry Conference
2023
Implementation of a multispot optic for temperature field-adapted welding of complex plastic components
SPIE Proceeding Vol. 12414, High-Power Laser Materials Processing
74-79
2023
Characterization of polymer waveguides in cavities on 3Dsubstrates manufactured using the Mosquito method
Proc. Lasers in Manufacturing (LiM)
2023
4XX nm diode-laser beyond 2 kW of output power
SPIE Proceedings Vol. 11983, High-Power Diode Laser Technology XX
119830O
2022
Process stability and weld seam geometry during deposition welding with high-carbon wire material AISI52100
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2022
Modelling of CFRP Laser Repair to Predict Ablation Depth
Proceedings of the 41st International Congress on Applications of Lasers & Electro-Optics (ICALEO)
41
Macro 203
2022
Laser-based Powder Bed Fusion of Ti-6Al-4V in Oxygen-Reduced and Oxygen-Free Environment
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
0658_0924_000087
2022
Selektives Laserstrahlschmelzen von Magnesiumlegierungen im industriellen Umfeld
DVS-Berichte
382
714-720
2022
Safety recommendations for 60 kW thick-plate welding in the maritime sector
Laser Systems Europe
2022
Laser welding of additively manufactured thermoplastic components assisted by a neural network-based expert system
SPIE Proceedings Vol. 11994: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XI
119940G-1 - 119940G-6
2022
DIOMAR: Dickblechschweißen mittels Höchstleistungs-Diodenlaser für maritime Anwendungen
Tagungsband Statustagung maritime Technologien
15-33
2022
Thermal process control for laser micro-drilling of thin CFRP-laminates
SPIE Proceedings Vol. 11994: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XI
1199407
2022
Molded parts with functional surfaces: Laser micromachining of injection molds
Proc. Bioinspired Materials
2022
Comparison between wavelengths of 940 nm and 1530 nm for laser transmission welding of glass fiber reinforced PPS
SPIE Proceedings Vol. 11994: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XI
119940J
2022
Spatially resolved temperature detection by double scanner and high speed pyrometry for process stabilization of SLS processes
SPIE Proceedings Vol. 11992: Laser 3D Manufacturing IX
119920C
2022
Manufacturing of Polymer Optical Waveguides for 3D-Opto-MID: Review of the OPTAVER Process
14th International Congress Molded Interconnect Devices (MID)
1-11
2021
Flussmittelfreies Laserstrahlhartlöten von Aluminiumlegierungen in silandotierter Argonatmosphäre
Schweissen und Schneiden
9
73
635-639
2021
Experimental setup for determination of absorption coefficient of laser radiation in molten metals as a function of temperature and angle
Proc. Lasers in Manufacturing (LiM)
2021
Process development for laser hot-wire deposition welding with high-carbon cladding Material AISI52100
Proc. Lasers in Manufacturing (LiM)
2021
Laser ablation of thermoplastic composite for aerospace application
Proc. Lasers in Manufacturing (LiM)
2021
Influence of laser focus shift on porosity and surface quality of additively manufactured Ti-6Al-4V
Proc. Lasers in Manufacturing (LiM)
2021
Additive manufacturing of fused silica using coaxial laser glass deposition: experiment, simulation, and discussion
SPIE Proceedings Vol. 11677, Laser 3D Manufacturing VIII
45-56
2021
Untersuchungen zum Einfluss von SiC-Mikro- und -Nanopartikeln in einer Aluminiumgusslegierung auf Gefüge und Härte beim Laserstrahlschweißen
Schweissen und Schneiden
9
73
630-636
2021
Investigations on the weld seam geometry of ultrasonic assisted laser beam welded round bars in and beside antinode position
Proc. Lasers in Manufacturing (LiM)
2021
Adjusting the surface roughness of WE43 components manufactured by laser-based powder bed fusion
Proc. Lasers in Manufacturing (LiM)
2021
Kombination des Durchsetzfügens mit dem Laserstrahlschweißen – Einfluss der Parameter- und Werkstoffvariation auf die statischen Verbindungseigenschaften
Schweissen und Schneiden
1.2
73
46-51
2021
Investigations on the transmissivity and scattering behavior of additively manufactured components for laser transmission welding applications
Proc. Lasers in Manufacturing (LiM)
2021
Laser beam-submerged arc hybrid welding of thick duplex steels for industry
Laser Systems Europe
20-21
2021
Laser beam-submerged arc hybrid welding of thick duplex stainless steel
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2021
High-Power Joining of Duplex Steels using Laser Beam-Submerged Arc Hybrid Welding
Proc. Lasers in Manufacturing (LiM)
2021
Automatic changing of weld deposit for additive manufacturing of hybrid metal-glass components using direct laser deposition
Proc. Lasers in Manufacturing (LiM)
2021
Optimization of the laser cutting of 1.4301 steel sheets under water for nuclear decommissioning purposes
Proc. 15. Internationales Symposium „Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle“ (KONTEC)
107
2021
Rotary Straightening of Fine Wire for LMD-W Applications
Proc. Lasers in Manufacturing (LiM)
271
2021
Molded parts with functional surfaces - how laser microstructuring can be used for low-cost mass products
Proc. Lasers in Manufacturing (LiM)
2021
Development of a machine concept for the processing of Ti-6Al-4V in the PBF-LB/M process under silandized argon atmosphere
Proc. Lasers in Manufacturing (LiM)
2021
Minimierung der Risiken durch Kontamination im Arbeitsumfeld und Betrachtung der Toxikologie von Faserbruchstücken beim Laserstrahltrennen von Faserverbundkunststoffen
Fachtagung „Experimentelle Strömungsmechanik“ der German Association for Laser Anemometry (GALA) (Fachtagung „Experimentelle Strömungsmechanik“ der German Association for Laser Anemometry (GALA))
34.1-34.9
2021
Potential health risks due to emission of hazardous substances during outdoor laser cutting
Proc. Lasers in Manufacturing (LiM)
2021
Interaction between laser radiation and antifouling coating underwater
Proc. Lasers in Manufacturing (LiM)
2021
Additive manufacturing of coppermolybdenum pseudoalloys
SPIE Proceedings Vol. 11349: 3D Printed Optics and Additive Photonic Manufacturing
113490C
2020
Realization of laser safety during outdoor laser material processing
Proceedings of the 11th CIRP Conference on Photonic Technologies (LANE 2020)
2020
Laser-based welding for repair of thermoplastic CFRP composites
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2020
Investigations on the effect of different ultrasonic amplitudes and positions in the vibration distribution on the microstructure of laser beam welded stainless steel
SPIE Proceedings Vol. 11273: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems IX
112730J
2020
Design and fabrication of multilayer GRIN lenses by multi-material additive manufacturing for light coupling applications in planar optoelectronic systems
SPIE Proceedings Vol. 11283: Integrated Optics: Devices, Materials, and Technologies XXIV
112831K
2020
Laserstrahlschweißen von Stahl-Kupfer-Mischverbindungen zur Herstellung von Schwingungskompensatoren im Rohrleitungsbau
Schweissen und Schneiden
5
282-286
2020
Investigations on welding of several materials with adjustable intensity profiles: new approaches and findings
SPIE Proceedings Vol. 11273: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems IX
112730I
2020
Laser drilling of CFRP for aerospace applications – High quality and yet fast?
Proceedings of International Conference & Exhibition on Thermoplastic Composites
264-268
2020
Divide-and-conquer laser beam deflection system: fast, wide-ranging and flexible
Laser-based Micro- and Nanoprocessing XIV
11268
6
2020
Minimieren der Gefahren durch Kontamination und Verschleppung im Arbeitsumfeld bei der laseradditiven Verarbeitung von Metallpulvern
DVS Congress
365
2020
183-189
2020
Laser Transmission Welding With A Multi-Focal Optic
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2020
Laser based repair of CFRP for the aerospace industry
SPIE Proceedings Vol. 11273: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems IX
112730G
2020
Joining of thermoplastic CFRP laminates by selective heat input during laser cutting
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2019
Comparison of two NIR lasers for composite repair preparation by laser ablation and the effect on interlaminar fracture toughness of CFRP
Proceedings of the 15th Conference on Laser Ablation (COLA)
2019
Additive Manufacturing of CuSn10 Powder via Selective Laser Melting
Proc. Lasers in Manufacturing (LiM)
2019
Safety issues concerning technical realization and usage of a mobile laser rescue device
Proc. International Laser Safety Conference (ILSC)
1302
2019
Sicherheitsaspekte bei der technischen Realisierung und Verwendung eines neuartigen modularen, mobilen Laserrettungsgeräts
Konferenzband 51. FS-Jahrestagung - Strahlenschutz und Medizin
285-290
2019
How laser technology can contribute to foster a widespread use of advanced composite materials for light weight applications
SPIE Proceedings Vol. 10911: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII
10911
1091108
2019
Laser transmission welding of additive manufactured components
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
macro 302
2019
Welding dissimilar metals in the shipbuilding and automotive industries
Laser Systems Europe
42
20-21
2019
Investigations to increase process reliability in GMA welding by laser beam stabilisation
Welding and Cutting
2
18
125-129
2019
Advanced macro drilling of carbon fibre reinforced plastics for aerospace applications
SPIE Proceedings Vol. 10911: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII
109110N
2019
Prozessgasführung mit verschiedenen Düsengeometrien am Laserschneidkopf für das Trennen von Mehrlagenstrukturen im Zuge von Rettungeinsätzen
Fachtagung „Experimentelle Strömungsmechanik“ 2019 der Deutschen Gesellschaft für Laser-Anemometrie (GALA) e.V.
45.1-45.8
2019
Verschleppung von Gefahrstoffen im Verlauf der Prozesskette beim selektiven Laserschmelzen
Vortragsband Gesundheits- und Arbeitsschutz
2019
Safety during handling of metal powders in the course of additive manufacturing: Risk assessment along the entire process chain
Proc. Lasers in Manufacturing (LiM)
2019
Laser heat conduction welding of CFRP with modified matrix material
SPIE Proceedings Vol. 10911: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII
109110T
2019
Neue Entwicklungen bedingen neue Anforderungen an die Sicherheit: Innovatives Lasersystem zur Rettung bei komplexen Unfallszenarien
Für die Zukunft gewappnet? Sicherheit und Gesundheit in der Feuerwehr – Dokumentation des FUK-Forum {\textquotedbl}Sicherheit"2017
30-43
2018
Mobile laser cutting system for complex rescue operations
SPIE Proceedings Volume 10525: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII
1052509
2018
In-process control of penetration depth for high-power laser welding of thick dissimilar joints of steel and aluminum
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2018
Untersuchungen zur Erhöhung der Prozesssicherheit beim MSG-Schweißen durch Laserstrahlstabilisierung
DVS Schweißen und Schneiden
9
70
628-633
2018
Design and Simulation of Multilayer Lens for Light Coupling Applications in Photonic Integrated Circuits
DGaO-Proceedings
119
B20
2018
Der Laser kommt zum Werkstück: Mobile Lasermaterialbearbeitung
phi - Produktionstechnik Hannover Informiert
(online)
2018
Innenhochdruckumgeformte, laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau
Energie / Effiziente Verarbeitung zukunftsweisender Leichtbau Werkstoffe; Tagungsband T 44 des 37. EFB-Kolloquiums Blechverarbeitung 2017
125-133
2017
Erhöhung der Verschleißbeständigkeit von Umformwerkzeugen mit Hilfe des Laserstrahllegierens
Tagungsband 2. Niedersächsisches Symposium Materialtechnik
4
77-88
2017
Steigerung der Prozessstabilität und Schweißnahtqualität beim Remote-Laserstrahlschweißen durch adaptierte Strömungsführung
Schweissen und Schneiden
9
69
632-638
2017
Closing the loop – Using Online Monitoring Techniques for an Automated Laser Welding Process Optimization in Industrial Applications
Proc. Lasers in Manufacturing (LiM)
2017
Analysis of hazardous substances released during CFRP laser processing
SPIE Proceedings Vol. 10097: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VI
100970Q
2017
Freisetzung von Gefahrstoffen bei der Laserbearbeitung von kohlenstofffaserverstärkten Kunststoffen – Teil 1
Joining Plastics - Fügen von Kunststoffen
2
11
116-121
2017
Freisetzung von Gefahrstoffen bei der Laserbearbeitung von kohlenstofffaserverstärkten Kunststoffen – Teil 2
Joining Plastics - Fügen von Kunststoffen
3/4
11
186-193
2017
Additive Fertigung, aber sicher – Aktueller Stand der Arbeitssicherheit bei der additiven Fertigung
Proc. Rapid.Tech Conference
173-184
2017
Festigkeitsbetrachtung von dickwandigen Stahl-Aluminium-Laserstrahlschweißnähten
Proc. Schweißen in der maritimen Technik und im Ingenieurbau
2017
Strength Analysis of Laser Beam Welded Steel-Aluminium-Joints for Maritime Light Weight Applications
Proc. International Conference on Mechanics and Materials in Design
2017
Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen
Schweissen und Schneiden
9
69
600-607
2017
Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall
Tagungsband 2. Niedersächsisches Symposium Materialtechnik
4
259-268
2017
Untersuchungen zum Laserstrahlschweißen artungleicher Verbindungen aus Aluminium- und Stahlwerkstoffen aus dem Karosseriebau mit aluminiumseitiger Einstrahlung
Tagungsband 2. Niedersächsisches Symposium Materialtechnik
4
269-284
2017
Process emissions during laser processing of CFRP: measurement of hazardous substances and recommendation of protective measures
Proc. Lasers in Manufacturing (LiM)
2017
Luftströmungsführung in Bearbeitungsstationen zum Remote-Laserstrahlschweißen – Teil 2: Simulationen zur Anlagenoptimierung
Tagungsband der Fachtagung “Experimentelle Strömungsmechanik{\textquotedbl}
22:1-8
2016
Laser-based gluing of diamond-tipped saw blades
SPIE Proceedings Vol. 9741: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V
97410C
2016
Transmission laser bonding of low-melting eutectic alloys
SPIE Proceedings Vol. 9741: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V
97410K
2016
Monitoring of solidification crack propagation mechanism in pulsed laser welding of 6082 aluminum
SPIE Proceedings Vol. 9741: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V
97410H
2016
Luftströmungsführung in Bearbeitungsstationen zum Remote-Laserstrahlschweißen – Teil 1: Experimente zur Anlagenoptimierung
Tagungsband der Fachtagung “Experimentelle Strömungsmechanik{\textquotedbl}
21:1-10
2016
Selective Laser Melting of Magnesium Alloys for Biomedical Applications
Proc. International Conference on Additive Industries
443-446
2016
Laserbasiertes Kleben von diamantbestückten Segmenten an Trennscheiben
Diamond Business
2
57
24-31
2016
Optimierung der Luftströmungsführung in Bearbeitungskabinen zum Remote-Laserstrahlschweißen
Scientific Reports, Journal of the University of Applied Sciences Mittweida
4
95-98
2015
Kleben statt Löten – Werden zukünftig Schneidsegmente mit Laserunterstützung an Sägeblätter geklebt?
Werkstoffe in der Fertigung
3
28-30
2015
Konditionierung von Kupferwerkstoffoberflächen zur Stabilisierung des Dauerstrich-Lasermikroschweißens
Metall
11
69
439-442
2015
Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau
Stahlbau
12
84
1016-1022
2015
Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau
EFB-Kolloquium Blechverarbeitung
175-184
2015
Bauteilregeneration bei einkristalliner Gefügestruktur. Auftragschweißen und spanende Rekonturierung zur Regeneration einkristalliner Bauteile
wt Werkstattstechnik online
6
103
476-480
2013
Laser Cutting of Semi-Finished CFRTP Products for Better Resource Efficiency
Proceedings of the 42nd International Congress on Applications of Lasers and Electro-Optics (ICALEO)
Konferenzbeiträge (292)
Additive Manufacturing of Ti-6Al-4V with laser-wire DED and local shielding gas protection
13th CIRP Conference on Photonic Technologies (LANE)
16. - 19. September
Fürth
2024
Ultrasonic levitation as containerless handling for in-space manufacturing
SPIE Photonics Europe
20. Juni
Straßburg
2024
Investigation of laser wire bonding for the fabrication of tensegrity structures
13th CIRP Conference on Photonic Technologies LANE 2024
15.-19. September
Fürth
2024
Laser remelting of regolith in vacuum: Reducing porosity for enhanced lunar resource utilization
13th CIRP Conference on Photonic Technologies (LANE)
18. September
Fürth
2024
Development environment for a regolith melting process for a lunar flight demonstration mission
Luxembourg Space Resources Week
25.-27. März
Luxemburg
2024
SFB1153-A3 Ultraschallunterstütztes Laserstrahlschweißen von Rundstangen
CZM-Absolvententag
12. Juli
Clausthal-Zellerfeld
2024
Temporal power modulation in high power laser beam welding of round bars
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
Ultraschallunterstütztes Laserstrahlschweißen zur Erzeugung umformbarer Mischverbindungen
24. Umformtechnisches Kolloquium Hannover (UKH)
13.03.2024
Garbsen
2024
Characterization of laser-induced surface structures of aluminum in an oxygen-free atmosphere
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Führt
2024
Flussmittelfreies Laserstrahllöten durch lokale Desoxidation
24. Umformtechnischen Kolloquium Hannover
13.-14. März
Garbsen
2024
Quality-assured laser transmission welding of additively manufactured components with the support of an expert system
SPIE Photonics West: LASE
27. Januar - 01. Feburar
San Francisco
2024
Deep penetration welding of brass with subsequent wire filling process by laser beam with combined core and ring beam
13th CIRP Conference on Photonic Technologies (LANE)
16.-19. September
Fürth
2024
Design of a wire nozzle unit for a coaxial deposition head to manufacture wire bridges
Innovative Product Development by Additive Manufacturing 2024
24. September
Hannover
2024
Thermal evaluation of a laser microdrilling process for thin CFRP-laminates
SPIE Photonics West: LASE
27. Januar - 01. Februar
San Francisco
2024
A small volume, local shielding gas chamber with low gas consumption for Laser Wire Additive Manufacturing of bigger titanium parts
International Solid Freeform Fabrication Symposium (SFF)
16. August
Austin
2023
Additive Multimaterial 3D-Structures
SPIE Photonics West
28. Januar - 02. Februar
San Francisco
2023
Novel weling strategies in high deposition rate laser-assisted double-wire welding with nontransferred arc
Solid Freeform Fabrication Symposium 2023
16. August
Austin, Texas (USA)
2023
Welding between confinements as a new approach for high deposition rate additive manufacturing with laser-assisted double wire welding with nontransferred arc
International Congress on Applications of Lasers & Electro Optics (ICALEO)
16.-19. Oktober
Chicago
2023
Development and evaluation of a compact processing head for Additive Manufacturing with laser-assisted double-wire welding with nontransferred arc
Innovative Product Development by Additive Manufacturing
20.-21. September
Hannover
2023
Seam geometry manipulation by oscillation amplitude adjustment in the LDNA process
SPIE Photonics West: LASE
28. Januar - 02. Februar
San Francisco
2023
Application of the ABA cladding technique to a wire based laser cladding process
International Congress on Applications of Lasers & Electro Optics (ICALEO)
16.-19. Oktober
Chicago
2023
Process-integrated alloy adjustment in laser deposition welding with two wires
International Solid Freeform Fabrication Symposium (SFF)
14.-16. August
Austin
2023
Laser Cutting of Semi-Finished CFRTP Products for Better Resource Efficiency
42nd International Congress on Applications of Lasers and Electro-Optics (ICALEO)
Chicago
2023
Laser Cutting of Semi-Finished CFRTP Products for Better Resource Efficiency
42nd International Congress on Applications of Lasers and Electro-Optics (ICALEO)
16.-19. Oktober
Chicago
2023
Precise Laser Processing of Complex Surfaces based on Triangulation and Real-Time Coordinate Transformation
Conference on Lasers in Manufacturing (LiM)
26.-29. Juni
München
2023
Precise Laser Processing of Complex Surfaces based on Triangulation and Real-Time Coordinate Transformation
Conference on Lasers in Manufacturing (LiM)
26.-29. Juni
München
2023
Laser Patterning of Thin Film Sensors on Bearing Shells
24th International Symposium on Laser Precision Microfabrication (LPM)
13.-16. Juni
Hirosaki
2023
Laserbasierte Additive Fertigung für neuartige Anwendungen
5. OptecNet Jahrestagung
25.-26. April
Fürstenfeldbruck
2023
Entwicklung von Prozessparametereinstellungen für das Laserstrahlschmelzen von Regolith unter Vakuum
Clausthaler Symposium für Materialtechnik
23.-24. Februar
Clausthal
2023
Influence of Silane-doped Argon Processing Atmosphere on Powder Recycling and Part Properties in L PBF of Ti-6Al-4V
International Solid Freeform Fabrication Symposium (SFF)
14.-16. August
Austin
2023
Laser-Based Powder Bed Fusion of Ti-6Al-4V Structures with Different Surface-Area-to-Volume Ratios in Oxygen-Reduced and Oxygen-Free En-vironment
5. Symposium Materialtechnik
23.-24. Februar
Clausthaler Zentrum für Materialtechnik
2023
Highlighting New Possibilities: A Comparison of SLOT and CT in the Analysis of 3D Printed Optical Elements
IPDAM23
20.-21. September
Hannover
2023
Highlighting new possibilities: A comparison of SLOT and CT in the analysis of 3D printed optical elements
Innovative Product Development by Additive Manufacturing
20. September
Hannover
2023
Process parameter development for additively manufactured lattice structures for dental implants
5th International Conference on Biomedical Technology (ICBT)
06.-08. November
Hannover
2023
Towards experimental process parameter development for Ti-6Al-4V TPMS lattice structures with application to small scale dental implants using micrographs
Solid Freeform Fabrication Symposium (SFF)
14.-16. August
Austin
2023
Flussmittelfreies Laserstrahlhartlöten von Aluminiumlegierungen unter sauerstofffreier Atmosphäre
5. Symposium Materialtechnik
23.-24. Februar 2023
Clausthal-Zellerfeld
2023
Finite Element Simulation of Process Temperatures During Laser Based Cutting of Unidirectional CFRP and Evaluation of Heat Affected Zone
SAMPE Europe Conference
03.- 05. Oktober
Madrid
2023
Does the Color Really Matter? New Approach to Laser Transmission Welding for Design and Repair
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
15.-19. Oktober
Chicago
2023
Joining of Duplex Stainless Steels Using High-Power Laser Beam-Submerged Arc Hybrid Welding
European Steel Technology and Application Days (ESTAD)
13.-15. Juni
Düsseldorf
2023
Recent Advances of the MOONRISE FM payload for demonstration of Regolith laser melting on the lunar surface
Luxembourg Space Resources Week
19.-21. April
Luxemburg
2023
Laser Beam Welding of Brass with Combined Core and Ring Beam
International Congress on Applications of Lasers & Electro Optics (ICALEO)
16.-19. Oktober
Chicago
2023
Material efficient production of functionally graded materials using coaxial laser double-wire directed energy deposition
SPIE Photonics West: LASE
31. Januar - 02. Feburar
San Francisco
2023
The MOONRISE experiment for laser melting of regolith
Workshop of the Toulouse Task Force on ISRU
15. Februar
Albi
2023
The MOONRISE payload - a first step towards additive manufacturing on the Moon
Laser Korea Congress
12.-13. Januar
Gwangju
2023
Investigations on Laser Beam Welding of Thin Aluminum Foils with Additional Filler Wire
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
16.-19. Oktober
Chicago
2023
Acousto-optic pulse-selective laser beam deflection for micromachining with ultrashort pulsed lasers
Conference on Lasers in Manufacturing (LiM)
26.-29. Juni
München
2023
Glass-based Additive Manufacturing by Laser Glass Deposition for the Production of Optical Systems
Innovative Product Development by Additive Manufacturing
20.-21. September
Garbsen
2023
Einkristalline Reparatur von rissähnlichen Strukturen auf einkristallinen Hochdruck Deckbändern
5. Symposium Materialtechnik
23.-24. Februar
Clausthal-Zellerfeld, Clausthaler Zentrum für Materialtechnik
2023
Monitoring of a single-mode cw laser process for texturing of aluminium cylinder bore surfaces of combustion engines for coating preparation
Conference on Lasers in Manufacturing (LiM)
26.-29. Juni
München
2023
Improving the Properties of Laser Beam Welded Thick Dissimilar Joints of Steel and Aluminum by Using Filler Material
International Solid Freeform Fabrication Symposium (SFF)
16.-19. Oktober
Chicago
2023
Laser Glass Deposition as an efficient tool for the Production of Structural Components and Optical Systems
International Congress on Applications of Lasers & Electro Optics (ICALEO)
16.-19. Oktober
Chicago
2023
Towards Integrated Optical Systems with Glass-based Additive Manufacturing by Laser Glass Deposition
Conference on Lasers in Manufacturing (LiM)
26.-29. Juni
München
2023
Advanced Laser Micro and Macro Drilling of CFRP for Aerospace Applications
International Conference on Composite Materials (ICCM)
30. Juli - 04. August
Belfast
2023
Process strategy for support-free manufacturing of overhangs in laser-based powder bed fusion of stainless steel 316L
Innovative Product Development by Additive Manufacturing
20.-21. September
Hannover
2023
Bewertung der Untersuchungen zu den Gefahren und zur Toxikologie von Faserbruchstücken beim Laserstrahltrennen von Faserver-bundkunststoffen
30. Fachtagung „Experimentelle Strömungsmechanik“
06. September
München
2023
Adjustable Material Transfer in the Flexographic Printing Process Using Laser-Induced Microstructured Printing Forms for the Production of Polymer Optical Waveguides
International Congress on Applications of Lasers & Electro Optics (ICALEO)
16.-19. Oktober
Chicago
2023
Cost efficient production of superhydrophobic surfaces by injection molding of laser-generated stochastic structures
FEMS EUROMAT
03.-07. September
Frankfurt
2023
Development of innovative laser based processes for the aerospace industry
Laser Processing for Industry - Conference (PLI)
27.-28. September
Rennes
2023
Implementation of a multispot optic for temperature field-adapted welding of complex plastic components
SPIE Photonics West: LASE
28. Januar - 02. Februar
San Francisco
2023
Characterization of polymer waveguides in cavities on 3D substrates manufactured using the Mosquito method
Conference on Lasers in Manufacturing (LiM)
26.-29. Juni
München
2023
Advances in powder bed based Additive Manufacturing of metal-glass-hybrid-components
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Influence of an oxygen-free atmosphere on laser beam brazing of aluminium with prior surface deoxidation by pulsed laser radiation
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
4XX nm diode-laser beyond 2 kW of output power
SPIE Photonics West: LASE
22.-27. Januar
San Francisco
2022
Laserbasierte additive Fertigung für neue Anwendungen
Mitgliederversammlung des Bezirksverbandes Süd-Ost-Niedersachsen des DVS e.V.
11. Oktober
Wöltingerode
2022
Influence of the laser position in laser-assisted WAAM process on weld bead shape and surface properties
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
High deposition rate welding with a laser line optics with the laser-assisted doublewire deposition welding process with nontransferred arc
International Congress on Applications of Lasers & Electro-Optics (ICALEO®)
17.-20. Oktober
Orlando
2022
Influence of laser spot oscillation parameters on the seam geometry and dilution in the LDNA process
12th CIRP Conference on Photonic Technologies
04.-08. September
Fürth
2022
Process stability and weld seam geometry during deposition welding with high-carbon wire material AISI52100
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
17.-20. Oktober
Orlando
2022
Large-scale CO2 Laser-based Sol-Gel Annealing of Titanium Dioxide on Borosilicate Glass
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Modelling of CFRP Laser Repair to Predict Ablation Depth
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
16.-20. Oktober
Orlando
2022
Laser-Based Powder Bed Fusion of Ti-6Al-4V in Oxygen-Reduced and Oxygen-Free Environment
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
17.-21. Oktober
Orlando
2022
Determination of Optimum Process Parameters for Different Ti-6Al-4V Powders Processed by Laser-Based Powder Bed Fusion
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Investigations on the effect of standing ultrasonic waves on the microstructure and hardness of laser beam welded butt joints of stainless steel and nickel base alloy
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
17.-20. Oktober
Orlando
2022
Investigations on the effect of post treatment utilizing ultrasonic standing waves on the hardness of laser beam welds in stainless steel
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Selektives Laserstrahlschmelzen von Magnesiumlegierungen im industriellen Umfeld
DVS Congress
21. September
Koblenz
2022
Gefährdung durch UV Strahlung bei der Materialbearbeitung mit Handlasern
Bayerische Laserschutztage
18.-19. Januar
online
2022
Emission of scattered radiation from the process zone of welding processes using high-power diode lasers
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Investigations on laser beam brazing of aluminium alloys in butt joint configuration within an oxygen-free atmosphere
Materials Science and Engineering (MSE)
27.-29. September
Darmstadt
2022
Macroscopic simulation model for laser cutting of carbon fibre reinforced plastics
12th CIRP Conference on Photonic Technologies (Lane 2022)
04.-08. September
Fürth
2022
Laser welding of additively manufactured thermoplastic components assisted by a neural network-based expert system
SPIE Photonics West: LASE
22.-27. Januar
San Francisco
2022
Enabling laser transmission welding of additively manufactured thermoplastic parts using an expert system based on neural networks
International Congress on Applications of Lasers & Electro Optics (ICALEO)
17.-20. Oktober
Orlando
2022
Expert system-supported optimization of laser welding of additively manufactured thermoplastic components
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Investigations on microstructure and mechanical properties of laser beam-submerged arc hybrid welded butt joints of duplex stainless steel S31083 (t =16 mm)
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Development of the MOONRISE FM payload for demonstration of Regolith laser melting on the lunar surface
Space Resources Week
3.-5. Mai
Luxemburg
2022
The MOONRISE-Payload as proof of principle for Mobile Selective Laser Melting of Lunar Regolith
International Conference on Space Optics (ICSO)
03.-07. Oktober
Dubrovnik
2022
The MOONRISE-Payload as proof of principle for Mobile Selective Laser Melting of Lunar Regolith
10th European Lunar Symposium
24.-26. Mai
online
2022
Investigations on laser beam welding of thin foils of copper and aluminum regarding weld seam quality using different laser beam sources
International Congress of Applications of Lasers & Electro-Optics (ICALEO)
17.-20. Oktober
Orlando
2022
Multivariate parametric study on laser beam welding of copper lap joints using adjustable intensity profiles
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Single-Crystal Repair of High-Pressure Single-Crystal Turbine Blades for Industrial Conditions
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Direction dependency in coaxial laser double wire Direct Energy Deposition
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Laser Beam Welding of Thick Steel Plates Using a High-Power Diode Laser Beam Source
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
17.-20. Oktober
Orlando
2022
CO2 laser based welding of borosilicate glass by Laser Glass Deposition
12th CIRP Conference on Photonic Technologies (LANE)
04.-08. September
Fürth
2022
Laser microdrilling of CFRP with a nanosecondpulsed high-power laser
International Congress of Applications of Lasers & Electro-Optics (ICALEO)
16.-20. Oktober
Orlando
2022
Thermal process control for laser micro-drilling of thin CFRP-laminates
SPIE Photonics West: LASE
22.-27. Januar
San Francisco
2022
Discoloration of AISI 420 stainless steel in dependence of inter layer time during Laser-based Powder Bed Fusion
12th CIRP Conference on Photonic Technologies (LANE 2022)
04.-08. September
Fürth
2022
Design of Additively Manufacturable Injection Molds with Conformal Cooling
12th CIRP Conference on Photonic Technologies (LANE 2022)
04.-08. September
Fürth
2022
Optimierung der Faserprobenahme im Hinblick auf Größenseparation und Maximierung der Massenausbeute zur Untersuchung der Toxikologie von Faserbruchstücken
29. Fachtagung „Experimentelle Strömungsmechanik“
06.-08. September
Ilmenau
2022
Comparison between wavelengths of 940nm and 1530nm for laser transmission welding of glass fiber reinforced PPS
SPIE Photonics West: LASE
22.-27. Januar
San Francisco
2022
Spatially resolved temperature detection by double scanner and high speed pyrometry for process stabilization of SLS processes
SPIE Photonics West: LASE
22.-27. Januar
San Francisco
2022
Investigation of Kovar in PBF-LB/M
Conference on Lasers in Manufacturing (LiM)
21.-24. Juni
online
2021
Surface deoxidation of aluminium alloys with ns-pulsed laser radiation in XHV-adequate atmosphere for laser brazing processes
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
18.-20. Oktober
online
2021
Entwicklung einer intelligenten Prozessüberwachung und Regelung zum Laserauftragschweißen von Multimaterial-Verbindungen
Niedersächsisches Symposium Materialtechnik
25.-26. Februar
online
2021
Process development for laser hot-wire deposition welding with high-carbon cladding Material AISI 52100
Conference on Lasers in Manufacturing (LiM)
21.-24. Juni
online
2021
Laser ablation of thermoplastic composite for aerospace application
Conference on Lasers in Manufacturing (LiM)
21.-24. Juni
online
2021
Individualized and Controlled Laser Beam Pre-treatment Process for Adhesive Bonding of Fiber-Reinforced Plastics - Part III: Effects of Contaminants
International Congress on Applications of Lasers & Electro Optics (ICALEO)
18.-20. Oktober
online
2021
Influence of laser focus shift on porosity and surface quality of additively manufactured Ti-6Al-4V
Conference on Lasers in Manufacturing (LiM)
21.-24. Juni
online
2021
Investigations on the weld seam geometry of ultrasonic assisted laser beam welded round bars in and beside antinode position
Lasers in Manufacturing (LiM)
21.-24. Juni
online
2021
Investigations on the transmissivity and scattering behavior of additively manufactured components for laser transmission welding applications
Lasers in Manufacturing (LiM)
21.-24. Juni
online
2021
Laser Beam-Submerged Arc Hybrid Welding of Thick Duplex Stainless Steel
International Congress on Applications of Lasers & Electro Optics (ICALEO)
18.-20. Oktober
online
2021
High-Power Joining of Duplex Steels using Laser Beam-Submerged Arc Hybrid Welding
Lasers in Manufacturing (LiM)
21.-24. Juni
online
2021
Manufacturing of fused silica parts by means of Laser Glass Deposition
Conference on Lasers in Manufacturing (LiM)
21.-24. Juni
online
2021
Different approaches to prevent solidification cracking in laser beam welding stainless steel-copper dissimilar joints
International Congress on Applications of Lasers & Electro Optics (ICALEO)
18.-20. Oktober
online
2021
Experimental investigation of additive manufacturing of fused silica fibers for the production of structural components in the Laser Glass Deposition Process
Innovative Product Development by Additive Manufacturing
14. September
online
2021
Material loss analysis in glass additive manufacturing by laser glass deposition
International Congress on Applications of Lasers & Electro Optics (ICALEO)
18.-20. Oktober
online
2021
Development of a machine concept for the processing of Ti-6Al-4V in the PBF-LB/M process under silandized argon atmosphere
Lasers in Manufacturing (LiM)
20.-24. Juni
online
2021
Potential health risks due to emission of hazardous substances during outdoor laser cutting
Conference on Lasers in Manufacturing Conference (LiM)
22. Juni
online
2021
Minimierung der Risiken durch Kontamination im Arbeitsumfeld und Betrachtung der Toxikologie von Faserbruchstücken beim Laserstrahltrennen von Faserverbundkunststoffen
Fachtagung „Experimentelle Strömungsmechanik“
07.-09. September
Bremen
2021
Laser powder bed fusion of WE43 in hydrogen-argon-gas atmosphere
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Additive manufacturing of LMD nozzles for multi-material processing
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Generation of Laser-Induced Periodic Surface Structures on Different Glasses by a Picosecond-Pulsed Laser
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Single-crystal height extension by Laser Metal Deposition of CMSX-4
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Homogeneous annealing of TiO2, ZrO2 and ITO sol-gel layers with CO2 laser
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
A study of the effects of NIR laser radiation on interlaminar fracture toughness of CFRP
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Individualised and controlled laser beam pre-treatment process for adhesive bonding of fibre-reinforced plastics - Part II: automatic laser process controlled by spectrometry
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
20. Oktober
online
2020
Laser Powder Bed Fusion of NdFeB and influence of heat treatment on microstructure and crack development
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Snapshot hyperspectral imaging for quality assurance in Laser Powder Bed Fusion
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Investigations on pulsed laser beam welding of thin steel sheets in lap configuration over the face side/parallel joint
11th CIRP Conference on Photonic Technologies [LANE 2020]
06.-10. September
online
2020
Realization of laser safety during outdoor laser material processing
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Double pulse laser induced breakdown spectroscopy at 600 bar water pressure
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Divide-and-conquer laser beam deflection system: fast, wide-ranging and flexible
SPIE Photonics West: LASE
01.-06. Februar
San Francisco
2020
Laser Transmission Welding of Additive Manufactured Parts: Process Modifications to Reduce Cavities Inside the Weld Seam
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Koaxiales Laser-Pulver-Auftragschweißen mit zentraler Schweißgutzufuhr über ein Kapillarröhrchen zur Steigerung der Pulverausnutzung
Konstruktion für die Additive Fertigung
29. September
online
2020
Controlling the kerf properties of underwater laser cutting of stainless steel with 3 mm thickness using an Yb:YAG laser source
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Investigations on the effect of different ultrasonic amplitudes and positions in the vibration distribution on the microstructure of laser beam welded stainless steel
SPIE Photonics West: LASE
01.-06. Februar
San Francisco
2020
Introducing the concept of self sensing for ultrasonic assisted laser beam welding of 1.4301 stainless steel and 2.4856 nickel
The 17th International Workshop on Piezoelectric Materials and Applications in Actuators
22.-25. September
online
2020
Laser glass deposition of spheres for printing micro lenses
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Additiv gefertigte Glaskugellinsen für die Anwendung
Konstruktion für die Additive Fertigung
29. September
online
2020
Advantages of adjustable intensity profiles for laser beam welding of steel copper dissimilar joints
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Investigations on welding of several materials with adjustable intensity profiles: new approaches and findings
SPIE Photonics West: LASE
01.-06. Februar
San Francisco
2020
Laserbohren von Verbundwerkstoffen - Hochqualitativ und dabei effizient
10. IfW-Fachtagung „Prozesskette Bearbeitung von Verbundwerkstoffen“ (PKV)
30. November - 3. Dezember
online
2020
Surface functionalization of flexographic printing forms using a femtosecond laser for adjustable material transfer in MID produ
SPIE Photonics West: LASE
01.-06. Februar
San Francisco
2020
Ablation and functionalization of flexographic printing forms using femtosecond lasers for additively manufactured polymer-optical waveguides
11th CIRP Conference on Photonic Technologies (LANE)
07.-10. September
online
2020
Characterization and Functionalization of Flexographic Printing Forms for an Additive Manufacturing Process of Polymer Optical Waveguides
International Congress on Applications of Lasers & Electro Optics (ICALEO)
19.-22. Oktober
online
2020
Laser based repair of CFRP for the aerospace industry
Photonics West: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems IX
01.-06. Februar
online
2020
Laser Transmission Welding With A Multi-Focal Optic
International Congress on Applications of Lasers & Electro Optics (ICALEO)
19.-22. Oktober
online
2020
Improving the mechanical properties of laser beam welded hybrid workpieces by deformation processing
22nd International ESAFORM Conference on Material Forming
08.-10. Mai
Vitoria-Gasteiz
2019
Process development for additive multi-material components
Lasers in Manufacturing (LiM)
24.-27. Juni
München
2019
Joining of thermoplastic CFRP laminates by selective heat input during laser cutting
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
07.-10. Oktober
Orlando
2019
Case Studies of SX and DS Repair by means of Laser Metal Deposition
Advanced Manufacturing and Repair for Gas Turbines (AMRGT2019)
19. März
Berlin
2019
Process controller for scanning laser surface machining on cylinder surfaces
Lasers in Manufacturing (LiM)
23.-27. Juni
München
2019
Additive Manufacturing of CuSn10 Powder via Selective Laser Melting
Lasers in Manufacturing (LiM)
24.-27. Juni
München
2019
Safety issues concerning technical realization and usage of a mobile laser rescue device
International Laser Safety Conference (ILSC)
18.-21. März
Kissimmee
2019
Comparison of SLOT and µ-CT Investigation of 3D printed polymer parts for quality assurance
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
07.-10. Oktober
Orlando
2019
Model-based curing depth control of aerosol jet Stereolithography
International Conference of Photopolymer Science and Technology (ICPST-36)
24.-27. Juni
Chiba
2019
Sicherheitsaspekte bei der technischen Realisierung und Verwendung eines neuartigen modularen, mobilen Laserrettungsgeräts
Jahrestagung 2019 des Fachverbands für Strahlenschutz (FS)
09.-12. September
Würzburg
2019
Laser transmission welding of advanced thermoplastic composites as key enabler for the development of a new type of aircraft lin
EUROMAT 2019
01.-05. September
Stockholm
2019
How laser technology can contribute to foster a widespread use of advanced composite materials for light weight applications
SPIE Photonics West: LASE
03.-07. Februar
San Francisco
2019
Lightweight construction for shipbuilding - welding of thick dissimilar joints of steel and aluminum alloys with high strength
Lasers in Manufacturing (LiM)
23.-27. Juni
München
2019
Joining of dissimilar materials for lightweight construction in automotive, aerospace and shipbuilding
6th Industrial Laser Applications Symposium (ILAS 2019)
20.-21. März
Crewe
2019
Laser Transmission Welding of Additive Manufactured Components
International Congress on Applications of Lasers & Electro Optics (ICALEO)
06.-10. Oktober
Orlando
2019
Multi-material laser direct writing of aerosol jet layered polymers
69th CIRP General Assembly
18.-24. August
Birmingham
2019
Advanced macro drilling of carbon fibre reinforced plastics for aerospace applications
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Laser drilling of carbon fibre reinforced plastics – High quality machining for aerospace applications and yet a fast process?
EUROMAT 2019
01.-05. September
Stockholm
2019
Verschleppung von Gefahrstoffen im Verlauf der Prozesskette beim selektiven Laserschmelzen
5. Fachtagung Gesundheits- und Arbeitsschutz beim Schweißen 2019
07. Mai
Halle
2019
Safety during handling of metal powders in the course of additive manufacturing: Risk assessment along the entire process chain
Lasers in Manufacturing (LiM)
23.-27. Juni
München
2019
Prozessgasführung mit verschiedenen Düsengeometrien am Laserschneidkopf für das Trennen von Mehrlagenstrukturen im Zuge von Rettungeinsätzen
Fachtagung „Experimentelle Strömungsmechanik“ 2019
03.-05. September
Erlangen
2019
Laser heat conduction welding of CFRP with modified matrix material
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Advanced high pressure turbine blade repair technologies
International Conference on Photonic Technologies (LANE)
06. September
Fürth
2018
Laser based additive manufacturing for high temperature applications
Fraunhofer Direct Digital Manufacturing Conference DDMC 2018
14. März
Berlin
2018
Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction welding
5TH INTERNATIONAL CONFERENCE on recent trends in structural materials (COMAT)
14.-16. November
Pilsen
2018
Robot based remote laser cutting of three-dimensional automotive composite parts with thicknesses up to 5mm
International Conference on Photonic Technologies (LANE)
03.-06. September
Fürth
2018
Demonstration of a mobile laser cutting system for complex rescue operations
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
14.-18. Okt.
Orlando
2018
Online laser-based repair preparation of CFRP supported by short coherent interferometry
International Conference on Photonic Technologies (LANE)
03.-06. September
Fürth
2018
Automatic control for laser-based repair preparation of composites by fibre orientation detection and short coherent interferometry
International Congress on Applications of Lasers & Electro{\hbox-}Optics (ICALEO)
14.-18. Oktober
Orlando
2018
Mobile laser cutting system for complex rescue operations
SPIE Photonics West: LASE
27. Jan. - 01. Feb.
San Francisco
2018
Laser beam ablation of thick steel plates without affecting the material underneath
SPIE Photonics West: LASE
27. Januar - 01. Februar
San Francisco
2018
Weakening of thick steel plates by laser radiation for the removal of hazardous substances
International Conference on Photonic Technologies (LANE)
03.-06. September
Führt
2018
High precision laser macro-drilling of CFRP with a new nanosecond pulsed laser – optimized towards industrial needs
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
14.-18. Oktober
Orlando
2018
Laserstrahlschweißen von Stahl-Aluminium-Mischverbindungen für Automobil- und Schiffbau
Symposium Photonischer Leichtbau
14.-15. März
Garbsen
2018
Surface functionalization under water using picosecond and femtosecond laser pulses – first observations and novel effects
International Conference on Photonic Technologies (LANE)
03.-06. September
Fürth
2018
In-process control of penetration depth for high-power laser welding of thick dissimilar joints of steel and aluminum
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
14.-18. Oktober
Orlando
2018
Entwicklung von Laser-Systemkomponenten optimiert für die additive Fertigung mittels SLM
Konstruktion für die additive Fertigung
26. November
Hannover
2018
Improving weld bead homogeneity in short arc GMAW processes applying low power diode lasers
International Conference on Photonic Technologies (LANE)
03. Sept.
Fürth
2018
Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloy
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
14.-18. Oktober
Orlando
2018
Design and Simulation of Multilayer Lens for Light Coupling Applications in Photonic Integrated Circuits
DGaO 2018
22.-26. Mai
Aalen
2018
Additive manufacturing of glass: CO2-Laser glass deposition printing
International Conference on Photonic Technologies (LANE)
03.-06. September
Fürth
2018
Inhalation exposure to hazardous substances during powder-bed processes
International Conference on Photonic Technologies (LANE)
03.-06. September
Fürth
2018
Functional Coatings of Sol-Gel on Glass Substrate Using CO2 Laser Irradiation
International Conference on Photonic Technologies (LANE)
03.- 06. September
Fürth
2018
Temperature distribution during laser based heat conduction welding of CFRP
International Conference on Photonic Technologies (LANE)
05. September
Fürth
2018
Evaluation of Material Based Influences at Laser Based Heat Conduction Welding of CFRP
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
17. Oktober
Orlando
2018
Erhöhung der Verschleißbeständigkeit von Umformwerkzeugen mit Hilfe des Laserstrahllegierens
Niedersächsisches Symposium Materialtechnik
23.-24. Februar
Clausthal-Zellerfeld
2017
Neue Entwicklungen bedingen neue Anforderungen an die Sicherheit: Innovatives Lasersystem zur Rettung bei komplexen Unfallszenarien
7. FUK-Forum „Sicherheit“ 2017 der Feuerwehr-Unfallkassen
04.-05. Dezember
Hamburg
2017
Closing the loop – Using Online Monitoring Techniques for an Automated Laser Welding Process Optimization in Industrial Applications
Lasers in Manufacturing (LiM)
26.-29. Juni
München
2017
Single-crystal turbine blade tip repair by laser cladding and remelting
CIRP General Assembly
20.-26. August
Lugano
2017
Festigkeitsbetrachtung von dickwandigen Stahl-Aluminium-Laserstrahlschweißnähten
Schweißen in der maritimen Technik und im Ingenieurbau
19.-20. April
Hamburg
2017
Strength Analysis of Laser Beam Welded Steel-Aluminium-Joints for Maritime Light Weight Applications
International Conference on Mechanics and Materials in Design
11.-15. Juni
Albufeira
2017
Laser Welding of Dissimilar Joints of Steel and Aluminum for Ship Applications Using a High-Power Diode Laser
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
22.-26. Oktober
Atlanta
2017
Investigations on underwater laser cutting for decommissioning of marine constructions
Conference on Maritime Energy (COME)
28.-29. März
Hamburg
2017
Efficient air flow control for remote laser beam welding
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
22.-26. Oktober
Atlanta
2017
Influence of beam position and ultrasonic amplitude on the micro-structure of laser welded dissimilar steel-steel joints
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
22.-26. Oktober
Atlanta
2017
Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall
Niedersächsisches Symposium Materialtechnik
23.-24. Februar
Clausthal-Zellerfeld
2017
Laser Beam Welding of Ku Band Waveguides for Communication Satellites
International Microwave and Optoelectronics Conference (IMOC)
27.-30. August
Águas de Lindoia
2017
Effect of laser assistance in ultrasonic copper wire bonding
Lasers in Manufacturing (LiM)
26.-29. Juni
München
2017
Investigations on Remote Laser Beam Welding of Dissimilar Joints of X5CrNi18-10 and AA6082-T6 for Battery Housings
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
22.-26. Oktober
Atlanta
2017
Untersuchungen zum Laserstrahlschweißen artungleicher Verbindungen aus Aluminium- und Stahlwerkstoffen aus dem Karosseriebau mit aluminiumseitiger Einstrahlung
Niedersächsisches Symposium Materialtechnik
23.-24. Februar
Clausthal-Zellerfeld
2017
Ermittlung des Potentials der additiven Fertigung für Stentstrukturen aus Nickel-Titan
Workshop Additive Fertigung
20. September
Hannover
2017
Influence of scan width and wire feed speed on seam geometry and the substrate surface in laser wire cladding
International Congress on Applications of Lasers & Electro Optics (ICALEO)
16.-20. Oktober
San Diego
2016
Influence of Laser Power on the Shape of single Tracks in Scanner based Laser Wire Cladding
Conference on Lasers and Electro-Optics Europe (CLEO®/Europe)
19.-22. September
Fürth
2016
Significance of the resonance condition for controlling the seam position in laser-assisted TIG welding
International Conference on Photonic Technologies (LANE)
19.-22. September
Fürth
2016
Selektives Laserstrahlschmelzen von Magnesiumlegierungen
formnext
15.-18. November
Frankfurt am Main
2016
Laser-based gluing of diamond-tipped saw blades
SPIE Photonics West: LASE
13.-18. Februar
San Francisco
2016
Transmission laser bonding of low-melting eutectic alloys
SPIE Photonics West: LASE
13.-18. Februar
San Francisco
2016
Conditioning of copper material surfaces increasing the efficiency of continuous wave laser microwelding
CIRP General Assembly
21.-27. August
Guimaraes
2016
Efficient and Reliable Joining of Lightweight Materials
Stuttgart Laser Technology Forum
31. Mai-01. Juni
Stuttgart
2016
High-power laser welding of thick steel-aluminum dissimilar joints
International Conference on Photonic Technologies (LANE)
19.-22. September
Fürth
2016
Studies on the Robustness of Underwater Laser Cutting of S355J2+N Using a Yb:YAG Disk Laser Source
International Conference on Photonic Technologies (LANE)
19.-22. September
Fürth
2016
High power laser welding for several applications
OSA Laser Congress
30. Oktober-03. November
Boston
2016
Turbine blade tip single crystalline clad deposition with applied remelting passes for well oriented volume extension
International Congress on Applications of Lasers & Electro Optics (ICALEO)
16.-20. Oktober
San Diego
2016
Remote Laser Beam Welding of Different, Dissimilar Steel and Aluminum Alloys with Varying Sheet Thicknesses for Automotive Lightweight Construction
International Congress on Applications of Lasers & Electro Optics (ICALEO)
16.-20. Oktober
San Diego
2016
Investigations on laser beam welding of different dissimilar joints of steel and aluminum alloys for automotive lightweight construction
International Conference on Photonic Technologies (LANE)
19.-22. September
Fürth
2016
Luftströmungsführung in Bearbeitungsstationen zum Remote-Laserstrahlschweißen – Teil 1: Experimente zur Anlagenoptimierung
Fachtagung Experimentelle Strömungsmechanik
6.-8. September
Cottbus
2016
Selective Laser Melting of Magnesium Alloys for Biomedical Applications
International Conference on Additive Technologies (iCAT)
29.-30. November
Nürnberg
2016
Influence of molten pool geometry and process parameters on solidification cracks formation in hybrid laser-GMA welding of thick API 5L X70 steel plates
ABCM International Congress of Manufacturing Engineering (COBEM)
18.-22. Mai
Salvador
2015
Optimierung der Luftströmungsführung in Bearbeitungskabinen zum Remote Laserstrahlschweißen
Mittweidaer Lasertagung
19.-20. November
Mittweida
2015
Optimierte Luftströmungsführung beim Remote-Laserstrahlschweißen. Teil II: Numerische Untersuchungen
GALA Fachtagung Lasermethoden in der Strömungsmesstechnik
8.-10. September
Dresden
2015
Influence of Laser Power and Wavelength on the Resonant Interaction between Laser Radiation and TIG Welding Arc
Conference on Lasers in Manufacturing (LiM)
22.-25. Juni
München
2015
Selektives Laserstrahlschmelzen von Magnesium und Magnesiumlegierungen
Rapid.Tech
10.-11. Juni
Erfurt
2015
Laser Process Monitoring and Control of Real Process Features
Conference on Lasers and Electro-Optics Europe (CLEO®/Europe)
21-25 Juni
München
2015
Fügen dicker Bleche von Stahltürmen in der Windenergie mittels Laserstrahl-MSG Hybridschweißen
Türme und Maste aus Stahl – Neues aus Forschung und Anwendung
18. November
Düsseldorf
2015
High-performance hybrid welding process with integrated preheating of high-strength fine-grained steels
METEC & ESTAD
15.-19. Juni
Düsseldorf
2015
Future regeneration processes for high pressure turbine blades
Deutscher Luft- und Raumfahrtkongress (DLRK)
22.-24. September
Rostock
2015
Laser Soldering and Brazing of Steel-aluminum Sheets for Tailored Hybrid Tubes
International Congress on Applications of Lasers & Electro Optics (ICALEO)
18.-22. Oktober
Atlanta
2015
Joining of Aluminum Waveguides using Pulsed Laser Radiation
Asia-Pacific Microwave Conference (APMC)
6.-9. Dezember
Nanjing
2015
Additive Manufacturing of Elektron® 43 Alloy Using Laser Powder Bed and Directed Energy Deposition
EuroPM Congress
4.-7. Oktober
Reims
2015
Accelerated innovation through {\textquotedbl}laser based equipment assessment{\textquotedbl}
Industrial Laser Applications Symposium (ILAS)
17.-18. März
Kenilworth
2015
Analysis of potentially hazardous substances emitted during laser processing of carbon fiber reinforced plastics
Conference on Lasers in Manufacturing (LiM)
22.-25. Juni
München
2015
Optimierte Luftströmungsführung beim Remote-Laserstrahlschweißen. Teil I: Experimentelle Untersuchungen
GALA Fachtagung Lasermethoden in der Strömungsmesstechnik
8.-10. September
Dresden
2015
Single-crystal (SX) laser cladding of CMSX-4
ABCM International Congress of Manufacturing Engineering (COBEM)
18.-22. Mai
Salvador
2015
Einsatz des selektiven Lasermikroschmelzens zur Herstellung vaskulärer Implantate
Rapid.Tech
10.-11. Juni
Erfurt
2015
Relation between solidification flaws and molten pool geometry in hybrid laser-GMA welding of thick API 5L X70 steel plates
XXXII International Sodebras Congress
05.-07.12.2014
Curitiba
2014
Entwicklung eines Zangeninstruments mit gleitgeführten Betätigungsseilen für die Laparoskopie
CURAC Jahrestagung
11.-13. September
München
2014
Selective Laser Melting of Magnesium Alloys for Manufacturing Individual Implants
Fraunhofer Direct Digital Manufacturing Conference (DDMC)
12.-13. März
Berlin
2014
Design, processing and characterization of nickel titanium micro-actuators for medical implants
International Congress on Applications of Lasers & Electro Optics (ICALEO)
19.-23. Oktober
San Diego
2014
Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich
DVS Congress
15.-16. September
Berlin
2014
Laser dispersing of forging tools using AlN-ceramics
SPIE Photonics West: LASE
1.-6. Februar
San Francisco
2014
Effect of Heat Management on the Mechanical Properties of GMA-Laser Hybrid Welded High Strength Fine-Grained Steel
European Conference on Steel and Composite Structures (Eurosteel)
10.-12. September
Neapel
2014
Numerical and experimental investigations of induction assisted GMA-Laser hybrid welding
International Scientific Colloquium on Modelling for Electromagnetic Processing (MEP)
16.-19. September
Hannover
2014
Effizienzsteigerung beim Remote-Laserschweißen durch optimierte Luftströmungsführung
GALA Fachtagung Lasermethoden in der Strömungsmesstechnik
9.-11. September
Karlsruhe
2014
Testing procedure and PPE against UV- Radiation / Testmethoden und Schutztextilien gegen UV-Strahlung
Man-made Fibers Congress (MFC)
10.-12. September
Dornbirn
2014
A novel approach for high deposition rate cladding with minimal dilution with an arc - laser process combination
Conference on Lasers in Manufacturing (LiM)
13.-16. Mai
München
2013
Laser welding of fully austenitic twinning induced plasticity (TWIP) steels
International Congress on Applications of Lasers & Electro Optics (ICALEO)
06.-10. Oktober
Miami
2013
Selective Laser Melting of Magnesium Alloys for Manufacturing Individual and Biodegradable Implants
International Conference of Biomedical Technology (ECCOMAS Thematic Conference)
20.-22. November
Hannover
2013
Selective Laser Melting of Magnesium and Magnesium Alloys
TMS Annual Meeting & Exhibition
3.-7. März
San Antonio
2013
Selektives Laserschmelzen für die Fertigung zukünftiger Mikroimplantate – Eigenschaften und Testung
Rapid.Tech
14.-15. Mai
Erfurt
2013
Laserbasierte additive Fertigungsverfahren für zukünftige medizinische Anwendungen
Rapid.Tech
14.-15. Mai
Erfurt
2013
MESCHLAS - Fügen großformatiger Metallschaumsandwiches in der Schiffskonstruktion mittels LASER-Schweißen
Statustagung Schifffahrt und Meerestechnik
5. Dezember
Berlin
2013
Passive and active protective clothing against high-power laser radiation
Conference on Lasers in Manufacturing (LiM)
13.-16. Mai
München
2013
Induction Assisted GMA-Laser Hybrid Welding of High-Strength Fine-Grain Structural Steels
International Congress on Applications of Lasers & Electro Optics (ICALEO)
6.-10. Oktober
Miami
2013
Application of NIR-lasers for the control of aphids and whiteflies
DGG and BHGL Annual Conference
27. Februar-2. März
Bonn
2013
Progress in 3D: Future of medical Implants
International Congress on Applications of Lasers & Electro Optics (ICALEO)
6.-10. Oktober
Miami
2013
Additive manufacturing in micro scale
International Congress on Applications of Lasers & Electro Optics (ICALEO)
6.-10. Oktober
Miami
2013
Tribological investigation of laser cladded ceramic Al2O3 coatings on aluminium
World Tribology Congress (WTC)
8.-13. September
Torino
2013
Influence of Foaming Agents on Laser Based Manufacturing of Closed-cell Ti Foam
International Conference on Porous Metals and Metallic Foams (MetFoam)
23.-26. Juni
Raleigh
2013
Laser Welding of dissimilar materials for lightweight constructions
National Conference on Industrial Laser Processing (JNPLI)
26.-27. Juni
Yutz
2013
Adaptable orthopedic shape memory implants
CIRP Conference on BioManufacturing (BioM)
3.-5. März
Tokio
2013
Laser Welding of dissimilar Materials for lightweight Construction and special Applications
SPIE Photonics West: LASE
2.-7. Februar
San Francisco
2013
Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6
International Congress on Laser Advanced Materials Processing (LAMP)
23.-26. Juli
Niigata
2013
Laser welding of aluminium with two superimposed laser sources to increase the process efficiency and quality
IIW Annual Assembly and International Conference on Automation in Welding
11.-17. September
Essen
2013
Laser micro welding of aluminum with the superposition of a pulsed diode laser and a pulsed ND:YAG laser
International Congress on Applications of Lasers & Electro Optics (ICALEO)
6.-10. Oktober
Miami
2013
Laser Guided Double Tungsten Inert Gas Welding of Aluminium
International Congress on Applications of Lasers & Electro Optics (ICALEO)
23.-27. September
Anaheim
2012
Functional SLM parts using shape memory alloys
Laser Additive Manufacturing Workshop (LAM)
29. Februar-1. März
Houston
2012
Material processing with femtosecond laser pulses for medical applications
Conference of the German Society for Biomedical Engineering (BMT)
16.-19. September
Jena
2012
Additive manufacturing of drug delivery systems
Conference of the German Society for Biomedical Engineering (BMT)
16.-19. September
Jena
2012
Advances in micro-laser-melting of the shape-memory alloy NiTi
International Conference of the European Society for Precision Engineering and Nanotechnology (euspen)
4.-8. Juni
Stockholm
2012
Laser guided and stabilized gas metal arc welding processes (LGS-GMA)
Laser Interaction with Matter (LIMIS)
9.-12. September
Xi'an
2012
Investigation into the usage of different laser systems for weed control
International Conference Laser Optics (LO)
25.-29. Juni
St. Petersburg
2012
LAM for Medical Applications
International Congress on Applications of Lasers & Electro Optics (ICALEO)
23.-27. September
Anaheim
2012
Laser based manufacturing of closed Ti foam
European Conference on Foams, Emulsions and Applications (EUFOAM)
8.-11. Juli
Lissabon
2012
Stahl-Aluminium-Überlappverbindungen mit hohen Festigkeiten durch das Laserstrahlschweißen mit der spektroskopischen Einschweißtiefenkontrolle
DVS Congress
17.-18. September
Düsseldorf
2012
Laser-welded dissimilar steel-aluminum seams for automotive lightweight construction
International Conference on Photonic Technologies (LANE)