Veröffentlichungen
Seit der Gründung des LZH im Jahr 1986 publizieren die Wissenschaftler:innen ihre Forschungsergebnisse in Büchern, Buchkapiteln, Zeitschriftenaufsätzen und Konferenzbeiträgen. Auf diese Weise teilt das Institut neueste Erkenntnisse zur Lasertechnik und Photonik mit Interessierten aus Wirtschaft und Wissenschaft.
Diese Seite bietet einen Überblick der aktuellsten wissenschaftlichen Veröffentlichungen des LZH. Publikationen aus den vorangegangenen Jahren finden Sie hier:
Alle Wissenschaftliche Veröffentlichungen | Alle Dissertationen
Aktuelle wissenschaftliche Veröffentlichungen
Zeitschriftenaufsätze (reviewed) (57)
Zeitschriftenaufsätze (reviewed) (57)
Correlation of structural and optical properties using virtual materials analysis
Optics Express
16
27
22209-22225
2019
Improving the mechanical properties of laser beam welded hybrid workpieces by deformation processing
AIP Conference Proceedings
2113
040025
2019
Single Transparent Piezoelectric Detector for Optoacoustic Sensing-Design and Signal Processing
Sensors
10
19
E2195
2019
Demonstration of a mobile laser cutting system for complex rescue operations
Journal of Laser Applications
31
022209-1 - 022209-8
2019
Demonstration of a mobile laser cutting system for complex rescue operations
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
37
10
2019
Space-Qualified Pulsed DPSS-UV Laser for Martian Subsurface Exploration
Proc. Conference on Lasers and the Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
ca_4_5
2019
Automatic control for laser-based repair preparation of composites by fiber orientation detection and short coherent interferometry
Journal of Laser Applications
2
31
022204
2019
Process controller for scanning laser surface machining on cylinder surfaces
Proc. Lasers in Manufacturing (LiM)
348
2019
Mueller Matrix Measurement of Electrospun Fiber Scaffolds for Tissue Engineering
Polymers
12
11
2062
2019
Model-based curing depth control of aerosol jet stereolithography
J. Photopolym. Sci. Tec.
2
32
217-221
2019
Multimaterial bathless stereolithography using aerosol jet printing and UV laser based polymerization
Journal of Laser Applications
31
2019
022301-1 - 022301-5
2019
Hybrid UV laser direct writing of UV-curable PDMS thin film using aerosol jet printing
Applied Physics A
2
125
95
2019
Hydrogels for targeted waveguiding and light diffusion
Optical Materials Express
10
9
3925-3940
2019
Development of a laser ablation process model and a disposable 3D-printed tool head for weakening thick steel sheets for the deflagration of hazardous substances
CIRP Journal of Manufacturing Science and Technology
26
94-99
2019
Investigations on in-process control of penetration depth for high-power laser welding of thick steel-aluminum joints
Journal of Laser Applications
2
31
022418-1 - 022418-7
2019
Manipulating the melt propagation of short arc gas metal arc welding with diode lasers <1 kW for improvement in flexibility and process robustness
Journal of Laser Applications
2
31
022417
2019
All-sky search for long-duration gravitational-wave transients in the second Advanced LIGO observing run
Physical Review D
10
99
104033
2019
A Fermi Gamma-Ray Burst Monitor Search for Electromagnetic Signals Coincident with Gravitational-wave Candidates in Advanced LIGO's First Observing Run
The Astrophysical Journal
1
871
90
2019
All-sky search for continuous gravitational waves from isolated neutron stars using Advanced LIGO O2 data
Physical Review D
2
100
024004
2019
All-sky search for short gravitational-wave bursts in the second Advanced LIGO and Advanced Virgo run
Physical Review D
2
100
024017
2019
Binary Black Hole Population Properties Inferred from the First and Second Observing Runs of Advanced LIGO and Advanced Virgo
Astrophysical Journal Letters
2
882
L24
2019
Constraining the p-Mode-g-Mode Tidal Instability with GW170817
Physical Review Letters
6
122
061104
2019
Directional limits on persistent gravitational waves using data from Advanced LIGO’s first two observing runs
Physical Review D
6
100
062001
2019
First Measurement of the Hubble Constant from a Dark Standard Siren using the Dark Energy Survey Galaxies and the LIGO/Virgo Binary-Black-hole Merger GW170814
Astrophysical Journal Letters
1
876
L7
2019
Low-latency Gravitational-wave Alerts for Multimessenger Astronomy during the Second Advanced LIGO and Virgo Observing Run
The Astrophysical Journal
2
875
161
2019
Narrow-band search for gravitational waves from known pulsars using the second LIGO observing run
Physical Review D
12
99
122002
2019
Search for Eccentric Binary Black Hole Mergers with Advanced LIGO and Advanced Virgo during Their First and Second Observing Runs
The Astrophysical Journal
2
883
149
2019
Search for Gravitational Waves from a Long-lived Remnant of the Binary Neutron Star Merger GW170817
The Astrophysical Journal
2
875
160
2019
Search for gravitational waves from Scorpius X-1 in the second Advanced LIGO observing run with an improved hidden Markov model
Physical Review D
12
100
122002
2019
Search for Gravitational-wave Signals Associated with Gamma-Ray Bursts during the Second Observing Run of Advanced LIGO and Advanced Virgo
The Astrophysical Journal
1
886
75
2019
Search for intermediate mass black hole binaries in the first and second observing runs of the Advanced LIGO and Virgo network
Physical Review D
6
100
064064
2019
Search for Multimessenger Sources of Gravitational Waves and High-energy Neutrinos with Advanced LIGO during Its First Observing Run, ANTARES, and IceCube
The Astrophysical Journal
2
870
134
2019
Search for Subsolar Mass Ultracompact Binaries in Advanced LIGO’s Second Observing Run
Physical Review Letters
16
123
161102
2019
Search for the isotropic stochastic background using data from Advanced LIGO’s second observing run
Physical Review D
6
100
061101
2019
Search for Transient Gravitational-wave Signals Associated with Magnetar Bursts during Advanced LIGO’s Second Observing Run
The Astrophysical Journal
2
874
163
2019
Searches for Continuous Gravitational Waves from 15 Supernova Remnants and Fomalhaut b with Advanced LIGO
The Astrophysical Journal
2
875
122
2019
Searches for Gravitational Waves from Known Pulsars at Two Harmonics in 2015-2017 LIGO Data
The Astrophysical Journal
1
879
10
2019
Tests of general relativity with the binary black hole signals from the LIGO-Virgo catalog GWTC-1
Physical Review D
10
100
104036
2019
Corrosion and Corrosion Fatigue Properties of Additively Manufactured Magnesium Alloy WE43 in Comparison to Titanium Alloy Ti-6Al-4V in Physiological Environment
Materials
18
2019
1-24
2019
Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser beam welded aluminum alloy
Journal of Laser Applications
2
31
022402
2019
Surface Integrity of Laser Beam Welded Steel–Aluminium Alloy Hybrid Shafts after Turning
Metals
2
9
134
2019
Modeling, Simulation and Manufacturing of Polymer Optical Waveguides by Using the OPTAVER Process
OSA Technical Digest (online)
T2A.1
2019
Sub-50 fs, µJ-level pulses from a Mamyshev oscillator-amplifier system
Optics Letters
24
44
5973-5976
2019
Femtosecond laser induced step-like structures inside transparent hydrogel due to laser induced threshold reduction
PLOS ONE
9
14
1-15
2019
Implementation and uncertainty evaluation of spectral stray light correction by Zong’s method
Applied Optics
36
58
9998-10009
2019
Grating assisted glass fiber coupler for mode selective co-directional coupling
Optics Letters
9
44
2342-2345
2019
High precision laser macrodrilling of carbon fiber reinforced plastics with a new nanosecond pulsed laser—Optimized toward industrial needs
Journal of Laser Applications
2
31
022207
2019
Quantized nanolaminates as versatile materials for optical interference coatings
Optical Interference Coatings Conference (OIC), OSA Technical Digest
TB.3
2019
Fabrication of a Monolithic Lab-on-a-Chip Platform with Integrated Hydrogel Waveguides for Chemical Sensing
Sensors
19
19
4333
2019
High power, single-frequency, monolithic fiber amplifier for the next generation of gravitational wave detectors
Optics Express
20
27
28523-28533
2019
Systematic Comparison of Thermal Annealing and Laser Treatment of TiO2 Thin Films Prepared by Sol-Gel Processing
Lasers in Manufacturing and Materials Processing
4
6
387-397
2019
Zeitschriftenaufsätze (non-reviewed) (47)
Zeitschriftenaufsätze (non-reviewed) (47)
2.5-12 µm tunable, 2 µm pumped, ZnGeP2-based OPG/OPA System for the generation of narrowband, µJ-level pulses with sub-20 cm-1 bandwidth
Proc. Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
cf_7_3
2019
High quality bessel beam generation through reflective axicon for glass microprocessing
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
micro 902
2019
Joining of thermoplastic CFRP laminates by selective heat input during laser cutting
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
2019
Single-frequency Er3+ doped phosphate fiber MOPA
Proc. Conference on Lasers and Electro-Optics & European Quantum Electronics Conference (CLEO®/Europe-EQEC 2019)
cj_p_17
2019
Investigation of grating assisted mode-selective few-mode fused fiber couplers
Proc. Conference on Lasers and Electro-Optics & European Quantum Electronics Conference (CLEO®/Europe-EQEC 2019)
ci_5_6
2019
Optical design and characterization of the MOMA laser head flight model for the ExoMars 2020 mission
SPIE Proceedings Vol. 11180: International Conference on Space Optics
111805H
2019
Structured Auxiliary Mesh (SAM) algorithm for opto-thermal simulation of laser-based lighting systems
Proc. Conference on Lasers and Electro-Optics & European Quantum Electronics Conference (CLEO®/Europe-EQEC 2019)
ej_p_11
2019
Lasermaterialbearbeitung technischer Textil-Kunststoff-Verbünde in Leichtbauanwendungen
TEXTILplus
09/10
06-08
2019
Comparison of two NIR lasers for composite repair preparation by laser ablation and the effect on interlaminar fracture toughness of CFRP
Proceedings of the 15th Conference on Laser Ablation (COLA)
2019
Additive Manufacturing of CuSn10 Powder via Selective Laser Melting
Proc. Lasers in Manufacturing (LiM)
2019
Mechanical Design and Testing of the MOMA Flight Model Laser Head for the EXOMARS 2020 Mission
SPIE Proceedings Vol. 11180: International Conference on Space Optics
111805J
2019
Safety issues concerning technical realization and usage of a mobile laser rescue device
Proc. International Laser Safety Conference (ILSC)
1302
2019
CPA-free amplification of sub-10 ps pulses in Ho:YLF to the mJ-level at 2 μm wavelength
SPIE Proceedings Vol. 10896: Solid State Lasers XXVIII: Technology and Devices
108960Q
2019
High repetition rate, wavelength-tunable mid-IR source driven by ps-pulses from a Ho:YLF amplifier at 2 μm
Proc. Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
ca_9_6
2019
Monolithic amplifier based on a Chirally-coupled-core fiber
Proc. Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC 2019)
cj_p_19
2019
Broadband excess intensity noise due to an asymmetric Brillouin gain spectrum in optical fibers
SPIE Proceedings Vol. 10897: Fiber Lasers XVI: Technology and Systems
108971R
2019
Sicherheitsaspekte bei der technischen Realisierung und Verwendung eines neuartigen modularen, mobilen Laserrettungsgeräts
Konferenzband 51. FS-Jahrestagung - Strahlenschutz und Medizin
285-290
2019
Mobiles Lasergerät für die Technische Unfallrettung
phi - Produktionstechnik Hannover Informiert
(online)
2019
ReWork – An approach to a precise and automated surface preparation
CFK Valley Innovation Report
1
27
2019
ReWork – Ansatz für eine präzise und automatisierte Oberflächenvorbehandlung
CFK Valley Innovation Report
1
26
2019
How laser technology can contribute to foster a widespread use of advanced composite materials for light weight applications
SPIE Proceedings Vol. 10911: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII
10911
1091108
2019
Hydrogels for light delivery in in vivo optogenetic applications
SPIE Proceedings Vol. 11075: Novel Biophotonics Techniques and Applications V
110750H
2019
Opto-mechanical design and verification of the MOMA UV laser source for the ExoMars 2020 mission
SPIE Proceedings Vol. 10896: Solid State Lasers XXVIII: Technology and Devices
10896
108961Y
2019
Laser transmission welding of additive manufactured components
Proc. International Congress on Applications of Lasers & Electro-Optics (ICALEO)
macro 302
2019
GWTC-1: A Gravitational-Wave Transient Catalog of Compact Binary Mergers Observed by LIGO and Virgo during the First and Second Observing Runs
Physical Review X
3
9
031040
2019
Development of a Space-Qualified Pulsed Ultraviolet Laser for the Mars Organic Molecule Analyzer (MOMA) on the ExoMars 2020 Rover
Laser Congress 2019 (ASSL, LAC, LS&C), OSA Technical Digest (Optical Society of America, 2019)
ATh4A.5
2019
Welding dissimilar metals in the shipbuilding and automotive industries
Laser Systems Europe
42
20-21
2019
Investigations to increase process reliability in GMA welding by laser beam stabilisation
Welding and Cutting
2
18
125-129
2019
High-energy ultrafast Yb-fiber laser system based on a Mamyshev regenerator
Proc. Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
cj_7_2
2019
Fluorescence Dynamics of Laseractive Nanocrystals Emitting in the Visible
Proc. Conference on Lasers and Electro-Optics & European Quantum Electronics Conference (CLEO®/Europe-EQEC 2019)
cj_p_37
2019
Advanced macro drilling of carbon fibre reinforced plastics for aerospace applications
SPIE Proceedings Vol. 10911: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII
109110N
2019
Design and optimization of laseractive nanoparticles for fiber lasers
Proc. Conference on Lasers and Electro-Optics & European Quantum Electronics Conference (CLEO®/Europe-EQEC 2019)
cj_p_69
2019
Laser brazing of zinc-aluminum-magnesium coated steel – influence of the joint geometry
Proc. Lasers in Manufacturing (LiM)
2019
Prozessgasführung mit verschiedenen Düsengeometrien am Laserschneidkopf für das Trennen von Mehrlagenstrukturen im Zuge von Rettungeinsätzen
Fachtagung „Experimentelle Strömungsmechanik“ 2019 der Deutschen Gesellschaft für Laser-Anemometrie (GALA) e.V.
45.1-45.8
2019
Verschleppung von Gefahrstoffen im Verlauf der Prozesskette beim selektiven Laserschmelzen
Vortragsband Gesundheits- und Arbeitsschutz
2019
Safety during handling of metal powders in the course of additive manufacturing: Risk assessment along the entire process chain
Proc. Lasers in Manufacturing (LiM)
2019
Characterization of the Monolithic Fiber Amplifier Engineering Prototype for the Next Generation of Gravitational Wave Detectors
SPIE Proceedings Vol. 10897: Fiber Lasers XVI: Technology and Systems
1089722
2019
Characterization and Long-Term Operation of a 200 W Single-Frequency Fiber Amplifier for Gravitational Wave Detectors
Laser Congress 2019 (ASSL, LAC, LS&C), OSA Technical Digest (Optical Society of America, 2019)
ATu1A.5
2019
UV-DPSS Laser Flight Model for the MOMA Instrument of the ExoMars 2020 Mission
SPIE Proceedings Vol. 11180: International Conference on Space Optics (ICSO)
111801B
2019
Laser heat conduction welding of CFRP with modified matrix material
SPIE Proceedings Vol. 10911: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII
109110T
2019
Wavefront sensorless adaptive optics for optical coherence tomography guided femtosecond laser surgery in the posterior eye
SPIE Proceedings Vol. 10886: Adaptive Optics and Wavefront Control for Biological Systems V
1088603
2019
Concept for high speed vocal cord imaging with swept-source optical coherence tomography
SPIE Proceedings Vol. 10853: Optical Imaging, Therapeutics, and Advanced Technology in Head and Neck Surgery and Otolaryngology
108530H
2019
Konferenzbeiträge (77)
Konferenzbeiträge (77)
Limitations in measuring a well-defined laser-induced damage threshold
Advanced Laser Technologies
15.-20. September
Prag
2019
2.5-12µm tunable, 2µm pumped, ZnGeP2-based OPG/OPA System for the generation of narrowband, µJ-level pulses with sub-20cm-1 bandwidth
Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)
23.-27. Juni
München
2019
Improving the mechanical properties of laser beam welded hybrid workpieces by deformation processing
22nd International ESAFORM Conference on Material Forming
08.-10. Mai
Vitoria-Gasteiz
2019
Process development for additive multi-material components
Lasers in Manufacturing (LiM)
24.-27. Juni
München
2019
Fälschungssichere Produktmarkierungen auf Glas durch Pikosekunden-Laserbearbeitung
9. Workshop Laserbearbeitung von Glaswerkstoffen
05. Dezember
Nürnberg
2019
Joining of thermoplastic CFRP laminates by selective heat input during laser cutting
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
07.-10. Oktober
Orlando
2019
Single-frequency Er3+ doped phosphate fiber MOPA
Conference on Lasers and Electro-Optics & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
23.-27. Juni
München
2019
Investigation of grating assisted mode-selective few-mode fused fiber couplers
Conference on Lasers and Electro-Optics & European Quantum Electronics Conference (CLEO®/Europe-EQEC 2019)
23.-27. Juni
München
2019
Einkristalline Reparatur mittels Laserpulverauftragschweißen
Niedersächsisches Symposium für Materialtechnik 2019
14. Februar
Clausthal
2019
Case Studies of SX and DS Repair by means of Laser Metal Deposition
Advanced Manufacturing and Repair for Gas Turbines (AMRGT2019)
19. März
Berlin
2019
Space-Qualified Pulsed DPSS-UV Laser for Martian Subsurface Exploration
Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
23.-27. Juni
München
2019
High-Resolution Optical Broadband Monitoring for the Production of Miniaturized Thin-Film Filters
Optical Interference Coatings (OIC)
02.-07. Juni
Santa Ana Pueblo
2019
Polymer Fiber Lasers
21st International Conference on Transparent Optical Networks (ICTON)
09.-13. Juli
Angers
2019
Structured Auxiliary Mesh (SAM) algorithm for opto-thermal simulation of laser-based lighting systems
Conference on Lasers and Electro-Optics & European Quantum Electronics Conference (CLEO®/Europe-EQEC 2019)
23.-27. Juni
München
2019
Process controller for scanning laser surface machining on cylinder surfaces
Lasers in Manufacturing (LiM)
23.-27. Juni
München
2019
Thickness Monitoring and Enhanced Production Strategies for Optical Coatings
Optical Interference Coatings (OIC)
02.-07. Juni
Santa Ana Pueblo
2019
Additive Manufacturing of CuSn10 Powder via Selective Laser Melting
Lasers in Manufacturing (LiM)
24.-27. Juni
München
2019
Depth-dependent corneal UV-transmission after application of riboflavin-solutions with concentrations between 0.1 \% and 0.5 \%
International CXL Experts Meeting
05.-07. Dezember
Zürich
2019
Depth dependent measurements of the concentration of riboflavin to make the crosslinking (CXL) treatment safer
ARVO Annual Meeting
28. April - 02. Mai
Vancouver
2019
LUVMI and LUVMI-X: Lunar Volatiles Mobile Instrumentation Concept and Extension
15th Symposium on Advanced Space Technologies in Robotics and Automation (ASTRA)
27.-28. Mai
Noordwijk
2019
Safety issues concerning technical realization and usage of a mobile laser rescue device
International Laser Safety Conference (ILSC)
18.-21. März
Kissimmee
2019
CPA-free amplification of sub-10 ps pulses in Ho:YLF to the mJ-level at 2 μm wavelength
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
High repetition rate, wavelength-tunable mid-IR source driven by ps-pulses from a Ho:YLF amplifier at 2 μm
Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
23.-27. Juni
München
2019
Broadband excess intensity noise due to an asymmetric Brillouin gain spectrum in optical fibers
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Monolithic Amplifier Based on a Chirally-Coupled-Core Fiber
Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
23.-27. Juni
München
2019
Comparison of SLOT and µ-CT Investigation of 3D printed polymer parts for quality assurance
International Congress on Applications of Lasers & Electro-Optics (ICALEO)
07.-10. Oktober
Orlando
2019
Model-based curing depth control of aerosol jet Stereolithography
International Conference of Photopolymer Science and Technology (ICPST-36)
24.-27. Juni
Chiba
2019
Sicherheitsaspekte bei der technischen Realisierung und Verwendung eines neuartigen modularen, mobilen Laserrettungsgeräts
Jahrestagung 2019 des Fachverbands für Strahlenschutz (FS)
09.-12. September
Würzburg
2019
Laser transmission welding of advanced thermoplastic composites as key enabler for the development of a new type of aircraft lin
EUROMAT 2019
01.-05. September
Stockholm
2019
How laser technology can contribute to foster a widespread use of advanced composite materials for light weight applications
SPIE Photonics West: LASE
03.-07. Februar
San Francisco
2019
Characterization Strategies and Techniques for Optical Interference Coating for Laser Applications
Optical Interference Coatings (OIC)
02.-07. Juni
Santa Ana Pueblo
2019
Eine Qualitätskontrolle von optischen Beschichtungen für Photonik 4.0
V2019 VAKUUM & PLASMA
08.-10. Oktober
Dresden
2019
Charakterisierung in der optischen Dünnschichtproduktion
Sputtern in der Präzisionsoptik
09. Mai
Jena
2019
Laser-induced Damage in ALD Films
Optical Coatings for Laser Applications (OCLA)
11. April
Buchs
2019
Quality Control and Thin Film Metrology for Future Optical Components
OSA Technical Group Webinar
14. Mai
Hannover
2019
Ultra-fast Kerr Switches on the Basis of Dielectric Multi-layer Films
OSA Nonlinear Optics
15. Juli
Waikoloa
2019
Highest laser powers – not without understanding the limits of the coatings
OSA Laser Congress
30. September
Wien
2019
Hydrogels for light delivery in in vivo optogenetic applications
European Conferences on Biomedical Optics (ECBO)
23.-27. Juni
München
2019
Materials, structure and designs for femtosecond optics
International Conference on Pacific Rim Laser Damage & Thin Film Physics and Applications (SPIE-PLD/TFPA)
19.-22. Mai
Qingdao
2019
Joining of dissimilar materials for lightweight construction in automotive, aerospace and shipbuilding
6th Industrial Laser Applications Symposium (ILAS 2019)
20.-21. März
Crewe
2019
Lightweight construction for shipbuilding - welding of thick dissimilar joints of steel and aluminum alloys with high strength
Lasers in Manufacturing (LiM)
23.-27. Juni
München
2019
Opto-mechanical design and verification of the MOMA UV laser source for the ExoMars 2020 mission
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Laser Transmission Welding of Additive Manufactured Components
International Congress on Applications of Lasers & Electro Optics (ICALEO)
06.-10. Oktober
Orlando
2019
Tiefenabhängige korneale UV-Transmission nach Applikation von Riboflavinlösungen mit Konzentrationen zwischen 0.1 bis 0.5\%
117. DOG-Kongress
26.-29. September
Berlin
2019
Development of a Space-Qualified Pulsed Ultraviolet Laser for the Mars Organic Molecule Analyzer (MOMA) on the ExoMars 2020 Rover
Laser Congress 2019 (ASSL, LAC, LS&C)
29. September - 03. September
Wien
2019
Multi-material laser direct writing of aerosol jet layered polymers
69th CIRP General Assembly
18.-24. August
Birmingham
2019
Generation of secondary E-field distributions in optical thin film layers induced by scattering nanometer-sized impurities
SPIE Laser Damage
22.-25. September
Broomfield
2019
Generation of secondary E-field distributions in optical thin film layers induced by scattering nanometer-sized impurities
SPIE Laser Damage 2019
22.-25. September
Broomfield
2019
High-energy ultrafast Yb-fiber laser system based on a Mamyshev regenerator
Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO®/Europe-EQEC)
23.-27. Juni
München
2019
Laser deposition of fused silica coreless fibers to generate functional waveguides
Lasers in Manufacturing (LiM)
23.-27. Juni
München
2019
Targeted gene editing in potato protoplast via optical delivery of CRISPR/Cas9 ribonucleoproteins
PLANT 2030 Status Seminar
13.-15. März
Potsdam
2019
Summary on laser damage competitions
Optical Coatings for Laser Applications (OCLA)
11. April
Buchs
2019
Materialspezifische Defektentstehung in der Optikbeschichtung - Made InSitu
F.O.M.-Konferenz
06. November
Berlin
2019
In-situ-Oberflächeninspektion in PVD-Prozessen
37. Arbeitskreistreffen DUV/VUV
13. November
Darmstadt
2019
Design of Pr:YLF Core-Shell Nanocrystals for Fiber Lasers Emitting in the Visible Spectral Range
Nanophotonics and Micro/Nano Optics International Conference
04.-06. September
München
2019
Fluorescence Dynamics of Laseractive Nanocrystals Emitting in the Visible
Conference on Lasers and Electro-Optics & European Quantum Electronics (CLEO®/Europe-EQEC 2019)
23.-27. Juni
München
2019
Laser drilling of carbon fibre reinforced plastics – High quality machining for aerospace applications and yet a fast process?
EUROMAT 2019
01.-05. September
Stockholm
2019
Advanced macro drilling of carbon fibre reinforced plastics for aerospace applications
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Fiber-based laser systems for 3G detectors: State-of-the-art and outlook
13th Edoardo Amaldi Conference on Gravitational Waves (AMALDI 13)
07.-12. Juli
Valencia
2019
Towards temperature dependent emission characteristics in laser active nanocrystals
Nanophotonics and Micro/Nano Optics International Conference
04.-06. September
München
2019
Design and optimization of laseractive nanoparticles for fiber lasers
Conference on Lasers and Electro-Optics & European Quantum Electronics (CLEO®/Europe-EQEC 2019)
23.-27. Juni
München
2019
Design and Implementation of Passively Q-Switched Nd:YAG Laser Suitable for Space Applications in the Frame of the ESA Project QOMA II
29th International Laser Radar Conference (ILRC 29)
24.-28. Juni
Hefei
2019
Highly efficienct Rhodamine B doped polymer fiber lasers
The 28th International Conference on Plastic Optical Fibers
20.-22. November
Yokohama
2019
Laser brazing of zinc-aluminum-magnesium coated steel – influence of the joint geometry Autorinnen und Autoren
Lasers in Manufacturing (LiM)
23.-27. Juni
München
2019
Prozessgasführung mit verschiedenen Düsengeometrien am Laserschneidkopf für das Trennen von Mehrlagenstrukturen im Zuge von Rettungeinsätzen
Fachtagung „Experimentelle Strömungsmechanik“ 2019
03.-05. September
Erlangen
2019
Verschleppung von Gefahrstoffen im Verlauf der Prozesskette beim selektiven Laserschmelzen
5. Fachtagung Gesundheits- und Arbeitsschutz beim Schweißen 2019
07. Mai
Halle
2019
Safety during handling of metal powders in the course of additive manufacturing: Risk assessment along the entire process chain
Lasers in Manufacturing (LiM)
23.-27. Juni
München
2019
Characterization of the Monolithic Fiber Amplifier Engineering Prototype for the Next Generation of Gravitational Wave Detectors
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Characterization and Long-Term Operation of a 200 W Single-Frequency Fiber Amplifier for Gravitational Wave Detectors
Laser Congress 2019 (ASSL, LAC, LS&C)
29. September - 03. Oktober
Wien
2019
Herstellung filigraner Magnesium-Scaffoldstrukturen durch Einsatz des selektiven Laserstrahlschmelzverfahrens
Rapid.Tech
25.-27. Juni
Erfurt
2019
Laser flight model for the MOMA instrument of the ExoMars 2020 mission
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Laser heat conduction welding of CFRP with modified matrix material
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Polarized monolithic fiber oscillator for pico- and nanosecond operation at 2088 nm
SPIE Photonics West: LASE
02.-07. Februar
San Francisco
2019
Wavefront sensorless adaptive optics for optical coherence tomography guided femtosecond laser surgery in the posterior eye
SPIE Photonics West: BIOS
02.-07. Februar
San Francisco
2019
Concept for high speed vocal cord imaging with swept-source optical coherence tomography
SPIE Photonics West: BIOS
02.-07. Februar
San Francisco
2019
Buchkapitel (3)
Buchkapitel (3)
Entwicklung von Laser-Systemkomponenten optimiert für die additive Fertigung mittels SLM
In:
Konstruktion für die Additive Fertigung 2018
Springer Vieweg
Berlin, Heidelberg
21-34
2019
Design und Simulation einer planaren GRIN Linse zur Kopplung von Licht in einen Wellenleiter
In:
Konstruktion für die Additive Fertigung 2018
Springer Vieweg
Berlin, Heidelberg
319-333
2019
Laseradditive Fertigung dünnwandiger Magnesiumbauteile
In:
Konstruktion für die Additive Fertigung 2018
Springer Vieweg
Berlin, Heidelberg
2019
Aktuelle Dissertationen
Dissertationen