Veröffentlichungen

2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 0

25 Zeitschriftenaufsätze (reviewed)

M. Tröbs, P. Weßels, C. Fallnich, Phase-noise properties of an ytterbium-doped fiber amplifier for the laser Interferometer space antenna. Optics Letters 7 (30), 789–791 (2005)
M. Tröbs, P. Weßels, C. Fallnich, Power- and frequency-noise characteristics of an Yb-doped fiber amplifier and actuators for stabilization. Optics Express 6 (13), 2224–2235 (2005)
L. Büttner, J. Czarske, Investigation of the influence of spatial coherence of a broad-area laser diode on the interference fringe system of a Mach-Zehnder interferometer for highly spatially resolved velocity measurements. Applied Optics 9 (44), 1582–1590 (2005)
J. Czarske, J. Möbius, K. Moldenhauer, Mode-locking external-cavity laser-diode sensor for displacement measurements of technical surfaces. Applied Optics 25 (44), 5180–5189 (2005)
K. Dupré, R. Wilhelm, D. Kracht, M. Frede, L. Ackermann, 407 W End-pumped Multi-segmented Nd:YAG Laser. Optics Express 25 (13), 10140–10144 (2005)
W. Ertmer, C. Arnold, A. Heisterkamp, H. Lubatschowski, Streak formation as side effect of optical breakdown during processing the bulk of transparent Kerr media with ultra-short laser pulses. Applied Physics B - Lasers and Optics 2 (80), 247–253 (2005)
C. Fallnich, H. Hundertmark, A. Rühl, D. Wandt, D. Kracht, 0.7 W all-fiber Erbium oscillator generating 64 fs wave breaking-free pulses. Optics Express 16 (13), 6305–6309 (2005)
A. Heisterkamp, I. Z. Maxwell, S. Kumar, E. Mazur, J. A. Nickerson, J. M. Underwood, D. E. Ingber, Pulse energy dependence of subcellular dissection by femtosecond laser pulses. Optics Express 10 (13), 3690–3696 (2005)
J. Koch, A. Ostendorf, F. Korte, C. Fallnich, T. Bauer, B. N. Chichkov, Nanotexturing of gold films by femtosecond laser-induced melt dynamics. Applied Physics A - Materials Science & Processing 2 (81), 325–328 (2005)
J. Koch, K. Fumihiko, T. Tanabe, F. Korte, B. N. Chichkov, Influence of spatiotemporal coupling induced by an ultrashort laser pulse shaper on a focused beam profile. Applied Optics 6 (44), 1092–1098 (2005)
D. Kracht, M. Frede, R. Wilhelm, C. Fallnich, Nd:YAG ring laser with 213 W linearly polarized fundamental mode output power. Optics Express 19 (13), 7516–7519 (2005)
R. R. Krüger, T. Ripken, J. Kuszak, R. I. Myers, H. Lubatschowski, A. Heisterkamp, First safety study of femtosecond laser photodisruption in animal lenses: Tissue morphology and cataractogenesis. Journal of Cataract and Refractive Surgery 12 (31), 2386–2394 (2005)
M. Lappschies, H. Ehlers, T. Groß, D. Ristau, Optical broadband monitoring of thin film growth. Optics and Precision Engineering 4 (13), 403–412 (2005)
S. Martin, B. Clapp, K. Starke, J. Jasapara, M. Mero, W. Rudolph, J. Krüger, D. Ristau, W. Kautek, On the damage behavior of dielectric films when illuminated with multiple femtosecond laser pulses. Optical Engineering 5 (44), 51107-1-7 (2005)
O. Meier, H. K. Tönshoff, J. Bunte, L. Engelbrecht, Deformation Behaviour of Sheet Metals in Laser-Assisted Hydroforming Processes. Advanced Materials Research 6-8, 361–368 (2005)
F. Meyer, A. Ostendorf, U. Stute, Laser direct writing of thin-film copper structures as a modification of lithographic processes. Journal of Physics: Conference Series 1 (59), 408–412 (2005)
R. J. Narayan, C. Jin, A. Ovsianikov, A. Doraiswamy, M. Jelinek, I. N. Mihailescu, D. B. Chrisey, Laser processing of advanced bioceramics. Advanced Engineering Materials 12 (7), 1083–1098 (2005)
A. Ostendorf, F. Korte, J. Koch, C. Fallnich, B. N. Chichkov, Direct-write subwavelength structuring with femtosecond laser pulses. Optical Engineering 5 (44), 51103-1-5 (2005)
T. Pfister, L. Büttner, J. Czarske, Laser-Doppler-Profilsensor mit Submikrometerauflösung für Drehzahl- und Radiusmessung rotierender Objekte. Measurement Science & Technology 3 (16), 627–641 (2005)
D. Ristau, Standardisation in optical coating characterisation. Optics and Precision Engineering 4 (13), 435–453 (2005)
D. Ristau, J. Liu, M. Mero, W. Rudolph, K. Starke, Scaling laws of femtosecond laser pulse induced breakdown in oxide films. Physical Review B 11 (71), 115109-1-7 (2005)
H. K. Tönshoff, O. Meier, L. Engelbrecht, Extended forming limits using laser-assisted hydroforming. Steel Research International 12 (76), 920–924 (2005)
D. Wandt, P. Adel, L. Engelbrecht, C. Fallnich, Resonant nonlinearity in high-energy Er3+-fiber chirped-pulse-amplifiers. Optics Express 25 (13), 10260–10265 (2005)
D. Wandt, A. B. Seddon, V. K. Tikhomirov, J. Koch, B. N. Chichkov, Fabrication of buried waveguides and nanocrystals in Er$^3$+-doped oxyfluoride glass. physica status solidi (a) 7 (202), R73-R75 (2005)
R. Wilhelm, D. Kracht, M. Frede, C. Fallnich, Comparison of crystalline and ceramic composite Nd:YAG for high power diode end-pumping. Optics Express 16 (13), 6212–6216 (2005)

23 Zeitschriftenaufsätze (non-reviewed)

H. Becker, J. Bunte, H. Haferkamp, M. Deutschmann, R. Müller, Ceramic-metal composite layers generated by laser deposition - possibilities for metal forming and casting. Interceram 6 (54), 392–395 (2005)
B. Block, K. Samm, F. Siegel, Werkzeuge erhalten durch Lasertechnik den letzten Schliff. phi - Produktionstechnik Hannover Informiert 1 (6), 8–9 (2005)
J. Bunte, M. Fargas, A. von Busse, O. Meier, Lasergepulster Reinwasserstrahl zur Erhöhung der Abtragsleistung. Laser Magazin 5, 9–12 (2005)
J. Bunte, A. Fenske, H. Haferkamp, L. Engelbrecht, Ohne Verzug - Das Laserstrahllöten von Hartmetallschneiden an Kreissägeblätter spart Nacharbeit und erhöht die Festigkeit. MM-Maschinenmarkt 10, 30–31 (2005)
N. Bärsch, S. Barcikowski, Laser a femtosecondi per applicazioni dentali. Applicazioni Laser 3, 11–12 (2005)
C. Büsching, Trennen von Glaswerkstoffen: Licht statt Schneiden. Glaswelt 7 (58), 21–22 (2005)
B. N. Chichkov, A. Egbert, S. Becker, U. Hinze, Compact EUV source for at-wavelength metrology. Microlithography World 3 (14), 1–2 (2005)
H. Haferkamp, M. Deutschmann, Prozeßsicher zum Erfolg. Form und Werkzeug 3, 52–53 (2005)
H. Haferkamp, L. Engelbrecht, A. Fenske, M. Drygalla, O. Meier, B. Block, Lasertechnologie in der Blechbearbeitung. Metall 5 (59), 14–20 (2005)
K. Harley, O. Meier, L. Engelbrecht, Laserforschung orientiert sich am Bedarf der Praxis. Blech in Form 2, 34–37 (2005)
L. Hauschild, Mit Keramikpartikeln besser abschneiden. Photonik 6 (37), 16 (2005)
T. Hesse, Verbesserte Laserschweißnähte in der Automobilindustrie. phi - Produktionstechnik Hannover Informiert 2, 16–17 (2005)
F. Korte, G. Kamlage, U. Klug, Ultrakurzpulslaser - Avantgarde der Mikrotechnik. Mikroproduktion 2, 22–24 (2005)
H. Lubatschowski, Sehendes Skalpell - OCT-kontrollierte Mikrochirurgie mit ultrakurzen Laserpulsen. Laser Technik Journal 4, 63–66 (2005)
S. Martin, S. Barcikowski, J. Bunte, T. Burmester, M. Lenner, T. Püster, J. Krüger, A. Hertwig, C. Spielmann, W. Kautek, M. Brose, Sicherer Umgang mit Ultrakurzpuls-Lasern Teil 1. Laser Magazin 2, 6–11 (2005)
S. Martin, S. Barcikowski, J. Bunte, T. Burmester, M. Lenner, T. Püster, J. Krüger, A. Hertwig, C. Spielmann, W. Kautek, M. Brose, Sicherer Umgang mit Ultrakurzpuls-Lasern Teil 2. Laser Magazin 4, 13–18 (2005)
O. Meier, J. Huang, H. Haferkamp, B. Block, F. W. Bach, A. Ostendorf, T. Hassel, C. Bruns, Einfluss von Carbidpulvern als Impfmittel und einer mechanisch-thermischen Nahtnachbehandlung auf Gefüge und mechanische Eigenschaften von Schweißnähten an Titan. Schweißen & Schneiden 8 (57), 366–372 (2005)
O. Meier, F. W. Bach, J. Bunte, K. Harley, Serial inductive post heat treatment with laser beam welding of Tailored Blanks. Steel Grips 6 (3), 459–463 (2005)
J. Serbin, R. Houbertz, J. Schulz, B. N. Chichkov, Schnelle Herstellung photonischer Kristalle: Echtzeit-3D-Lithographie mit Hybridpolymeren. Physik in unserer Zeit 6 (36), 278–285 (2005)
K. Starke, D. Ristau, Charakterisierung von Laseroptiken für die Femtonik. Laser Technik Journal 4 (2), 76–81 (2005)
U. Stute, C. Büsching, O. Haupt, Substitution of conventional glass cutting by laser technology. Verre 6 (11), 30–34 (2005)
V. Vauchaud, T. Temme, F. Otte, G. Osterholt, Mikrostrukturierte Faseroptiken für aktive Fußgängerschutzsysteme. Inno Innovative Technik - Neue Anwendungen 32 (10), 16–17 (2005)
A. von Busse, O. Meier, H. Haferkamp, Online-Qualitätskontrollsystem für das Laserdurchstrahlschweißen von thermoplastischen Kunststoffen. Der Praktiker 11, 322–324 (2005)

104 Konferenzbeiträge

H. K. Tönshoff, U. Stute, F. Otte, F. Meyer, S. Gollapudi, Micro-structuring of thin film nano-coatings and modification of functional surfaces by UV-laser radiation. International Conference on THE Coatings in Manufacturing and Engineering5.-7. Oktober, Chalkidiki , 217-227 (2005)
S. Barcikowski, N. Bärsch, A. Ostendorf, Generation of nanoparticles during laser ablation - risk assessment of non-beam hazards during laser cleaning. Lasers in the Conservation of Artworks (LACONA)21.-25. September, Wien , 105 (2005)
S. Barcikowski, B. N. Chichkov, Femtosecond laser generation of nanoparticles in gases and liquid media. Russian-German Laser Symposium (RGLS)30. September-4. Oktober, Nizhny Novgorod , 18-19 (2005)
S. Barcikowski, N. Bärsch, R. Sattari, B. N. Chichkov, Nanoparticle risk assessment on the basis of laser-generated samples. EuroNanoForum6.-9. September, Edinburgh , 104 (2005)
N. Beermann, H. Ehlers, D. Ristau, Ion-source characterization based on an array of retarding field analyzers. SPIE Optical Systems Design: Advances in Optical Thin Films13.-15. September, Jena , 145-155 (2005)
O. Berend, Hochfrequentes Strahlpendeln zur Erhöhung der Prozessstabilität beim Laserstrahlschweißen mit hoher Schmelzbaddynamik. DVS-Innovationsforum, Schweißen und Schneiden12.-14. September, Essen (2005)
B. Block, H. Haferkamp, T. Hassel, A. Ostendorf, J. Huang, O. Meier, C. Bruns, Laser welding of titanium combined with a subsequent thermo-mechanical treatment. Conference on Lasers in Manufacturing (LiM)13.-16. Juni, München , 209-218 (2005)
B. Boese, H. Haferkamp, O. Meier, C. Schmid, Reparatur von Fahrzeugkarosseriestrukturen mit handgeführten Lasersystemen. Mechanisches Fügen und Kleben, Paderborner Symposium Fügetechnik23.-24. November, Paderborn , 161-172 (2005)
P. Breitenfeld, T. Ripken, H. Lubatschowski, Finite element method-simulation of the human lens during accommodation. Therapeutic Laser Applications and Laser-Tissue Interactions12.-16. Juni, München , 1-9 (2005)
J. Bunte, D. Herzog, H. Haferkamp, A. Ostendorf, O. Meier, Techniques for melt support during laser welding of aluminium foam. International Conference on Porous Metals and Metal Foaming Technology (MetFoam)21.-23. September, Kyoto , 635-638 (2005)
J. Bunte, F. W. Bach, O. Meier, K. Harley, Serielle induktive Nachwärmung beim Laserstrahlschweißen von Tailored Blanks. Industriekolloquium SFB 362 Fertigen in Feinblech23.-24. November, Clausthal-Zellerfeld , 149-157 (2005)
J. Bunte, A. von Busse, M. Hustedt, S. Barcikowski, H. Haferkamp, Refinement of polymer surfaces by laser dispersion of ceramic micro- and nanoparticles. Conference on Lasers in Manufacturing (LiM)13 -16. Juni, München , 489-494 (2005)
N. Bärsch, S. Barcikowski, T. Bauer, B. N. Chichkov, Bio-manufacturing: Laserbasierte Erzeugung bioaktiver Trägerstrukturen. Surfaces and Interfaces - Engineering at the Nanoscale7.-9. März, Frankfurt am Main , 50-51 (2005)
N. Bärsch, U. Stute, K. Werelius, F. Liebana, S. Barcikowski, A. Ostendorf, Microshaping of densely sintered zirconia ceramic using femtosecond lasers. International Congress on Applications of Lasers & Electro Optics (ICALEO)31. Oktober-3. November, Miami , 81-87 (2005)
B. N. Chichkov, Laser micro-machining, short pulse laser processing. Conference on Lasers and Electro-Optics (CLEO)12.-17. Juni, München , 651 (2005)
B. N. Chichkov, U. Hinze, A. Egbert, K. Eidmann, Electron-based ultrashort hard x-ray source. SPIE Photonics West: MOEMS-MEMS22.-27. Januar, San Jose , 208-214 (2005)
M. Drygalla, O. Meier, H. Haferkamp, J. Walter, M. Hustedt, A. von Busse, Neue Einsatzmöglichkeiten der Lasertechnik für Zerlegeaufgaben in kerntechnischen Anlagen. Internationales Symposium Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle (KONTEC)20.-22. April, Berlin (2005)
M. Drygalla, O. Meier, H. Haferkamp, J. Walter, M. Hustedt, A. von Busse, New possibilities for laser applications for dismantling tasks in nuclear facilities. Internationales Symposium Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle (KONTEC)20.-22. April, Berlin (2005)
L. Engelbrecht, A. Ostendorf, O. Meier, H. Haferkamp, Herstellung von Tailored Hybrid Blanks durch Laserstrahllöten mit Zinkbasisloten. Berichtskolloquium der Forschergruppe 505 - Hochleistungsfügetechnik für Hybridstrukturen22. November, Hannover , 7-19 (2005)
L. Engelbrecht, A. Ostendorf, H. Haferkamp, O. Meier, A. Fenske, Laserstrahllöten von Stahl, Aluminium und Magnesium zur Herstellung von Tailored Hybrid Blanks. Fügen mit minimaler Grundwerkstoffbeeinflussung (JOIN-TEC 2)22.-23. Februar, Halle an der Saale , 5-9 (2005)
M. Engelbrecht, D. Wandt, C. Fallnich, Broadly tunable actively Q-switched ytterbium fiber laser with high repetition rate. Conference on Lasers and Electro-Optics Europe (CLEO®/Europe)12.-17. Juni, München , 514 (2005)
W. Ertmer, C. Arnold, A. Heisterkamp, H. Lubatschowski, Numerical calculation of nonlinear ultrashort laser pulse propagation in water. SPIE Photonics West: MOEMS-MEMS22.-27. Januar, San Jose , 126-137 (2005)
M. Fargas, A. von Busse, J. Bunte, Flow field analysis during quasi-simultaneous welding of thermoplastics. Annual Technical Conference (ANTEC)1.-5. Mai, Boston , 196-200 (2005)
M. Fargas, A. von Busse, J. Bunte, Laser material micro-processing of shape memory alloys. SPIE Microtechnologies: Smart Sensors, Actuators, and MEMS9.-11. Mai, Sevilla , 162-170 (2005)
M. Frede, F. Seifert, R. Wilhelm, D. Kracht, C. Fallnich, B. Willke, High-Power-Laser System for Gravitational Wave Detection. Topical Problems of Nonlinear Wave Physics2.-9. August, St. Petersburg (2005)
M. Frede, F. Seifert, R. Wilhelm, C. Fallnich, D. Kracht, B. Willke, 195 W injection-locked single-frequency laser system. Conference on Lasers and Electro-Optics (CLEO)22.-27. Mai, Baltimore , 1-3 (2005)
M. Frede, F. Seifert, R. Wilhelm, C. Fallnich, D. Kracht, B. Willke, High-Power Fundamental Mode Single-Frequency Laser. Advanced Solid-State Lasers (ASSL)6.-9. Februar, Wien , MC2 (2005)
S. Günster, B. Görtz, M. Trovó, D. Ristau, G. L. Ravel, E. Quesnel, M. B. Danailov, IBS deposition of dense fluoride coatings for the vacuum ultraviolet free electron laser. SPIE Optical Systems Design: Advances in Optical Thin Films13.-15. September, Jena , 156-166 (2005)
H. Haferkamp, J. Bunte, L. Engelbrecht, Material characterisation for laser-assisted sheet metal hydroforming. Global Innovations Symposium13.-17. Februar, San Francisco , 83-88 (2005)
A. Heisterkamp, I. Z. Maxwell, D. E. Ingber, S. Kumar, J. A. Nickerson, J. M. Underwood, E. Mazur, Nanosurgery in live cells using ultrashort laser pulses. SPIE Photonics West: BiOS22.-27. Januar, San Jose , 230-235 (2005)
A. Heisterkamp, T. Ripken, P. Breitenfeld, G. Gerten, U. Oberheide, O. Kermani, S. Schumacher, C. Arnold, H. Lubatschowski, Ophthalmic applications of ultrafast laser pulses. SPIE Optical Technologies in Biophysics and Medicine27.-30. September, Saratov (2005)
D. Herzog, O. Meier, L. Engelbrecht, L. Richter, Innovative Laserverfahren zum Fügen artfremder Werkstoffe. Strategiekonzepte für den hybriden Leichtbau, Congress Intelligente Leichtbau Systeme5.-6. September, Hannover (2005)
U. Hinze, B. N. Chichkov, Ultrashort electron-based EUV and hard x-ray source. SPIE Advanced Lithography: Emerging Lithographic Technologies1.-3. März, San Jose , 808-814 (2005)
U. Hinze, A. Egbert, B. N. Chichkov, Applications of an electron-based EUV source: table-top grazing incidence reflectometer and imaging with a Schwarzschild objective. SPIE Advanced Lithography: Emerging Lithographic Technologies1.-3. März, San Jose , 715-720 (2005)
M. Hustedt, S. Barcikowski, N. Bärsch, R. Sattari, New methods for continuous production of customized nanoparticles using laser radiation. NanoEurope13.-15. September, St. Gallen (2005)
V. Janicki, M. Lappschies, O. Stenzel, B. Görtz, U. B. Schallenberg, D. Ristau, N. Kaiser, Comparison of gradient index and classical designs of a narrow band notch filter. SPIE Optical Systems Design: Advances in Optical Thin Films13.-15. September, Jena (2005)
M. Jupé, A. Melninkaitis, L. O. Jensen, D. Ristau, K. Starke, V. Sirutkaitis, High-resolution video-based inspection method for LIDT investigations of thin-disc laser crystals. SPIE Optical Systems Design: Advances in Optical Thin Films13.-15. September, Jena , 583-593 (2005)
P. Kadkhoda, H. Mädebach, D. Ristau, Angle resolved scatter measurements on optical components. Optical Fabrication, Testing and Metrology12.-16. September, Jena , 369-377 (2005)
P. Kadkhoda, H. Mädebach, D. Ristau, Spectral and angle resolved scatter investigation on optical functional surfaces and particles. SPIE Boulder Damage19.-21. September, Boulder , 129-137 (2005)
J. Koch, F. Korte, B. N. Chichkov, Direct-write sub-wavelength surface texturing with femtosecond laser pulses. Conference on Lasers in Manufacturing (LiM)13.-16. Juni, München , 481-482 (2005)
F. Korte, G. Kamlage, A. Ostendorf, U. Klug, B. N. Chichkov, Femtosecond versus picosecond laser ablation. SPIE Photonics West: LASE22.-27. Januar, San Jose , 1-8 (2005)
D. Kracht, D. Freiburg, R. Wilhelm, M. Frede, C. Fallnich, Power scaling of diode end-pumped Nd:YAG lasers via multi-segmented rods. Conference on Lasers and Electro-Optics (CLEO)22.-27. Mai, Baltimore , 171-173 (2005)
D. Kracht, M. Frede, R. Wilhelm, D. Freiburg, C. Fallnich, Thermal Design of Segmented Rod Laser Crystals. Advanced Solid-State Lasers (ASSL)6.-9. Februar, Wien , MB46 (2005)
D. Kracht, M. Frede, D. Freiburg, R. Wilhelm, C. Fallnich, High-Power End-Pumped Multi-Segmented Nd:YAG Laser. Advanced Solid-State Lasers (ASSL)6.-9. Februar, Wien , MF49 (2005)
M. Lappschies, H. Blaschke, K. Starke, M. Jupé, D. Ristau, Modern Topics in Standardized Laser-Induced Damage Threshold Measurements. Optical Fabrication, Testing and Metrology12.-16. September, Jena , 105-115 (2005)
M. Lappschies, B. Görtz, D. Ristau, Optical monitoring of rugate filters. SPIE Optical Systems Design: Advances in Optical Thin Films13.-15. September, Jena , 547-555 (2005)
H. Loleit, A. Kornfeld, N. Bärsch, A. Ostendorf, Integriert-optisches Miniaturinterferometer zur Positionsmessung von Mikroaktoren. MikroSystemTechnik-Kongress10.-12. Oktober, Freiburg , 759-762 (2005)
M. Masur, F. Liebana, U. Stute, An automatic cost calculation system for 3-d laser cutting based on characteristic numbers. International Conference on Sheet Metal (SheMet)5.-8. April, Erlangen-Nürnberg , 825-830 (2005)
O. Meier, H. Haferkamp, A. Ostendorf, M. Deutschmann, Capabilities of wear reduction of tools by laser dispersing. Conference on Lasers in Manufacturing (LiM)13.-16. Juni, München , 389-391 (2005)
O. Meier, A. von Busse, M. Fargas, J. Bunte, A. Ostendorf, Strategies for reduction of processing time in micro-machining of shape memory alloys using ultrashort-pulsed lasers. International Symposium on Laser Precision Microfabrication (LPM)4.-8. April, Williamsburg , 258-262 (2005)
O. Meier, O. Berend, H. Haferkamp, L. Engelbrecht, High-frequency beam oscillating to increase the process stability during laser welding with high melt pool dynamics. International Congress on Applications of Lasers & Electro Optics (ICALEO)31. Oktober-3. November, Miami , 1032-1041 (2005)
O. Meier, S. Czerner, P. Stippler, A. Ostendorf, P. Matteazzi, Direct Micro laser cladding with microscale nanophased powders. International Congress on Applications of Lasers & Electro Optics (ICALEO)31. Oktober-3. November, Miami , 325-330 (2005)
O. Meier, A. von Busse, M. Fargas, D. Herzog, Process monitoring using direct visualisation of the weld seam for laser transmission welding of plastics. Conference on Lasers in Manufacturing (LiM)13.-16. Juni, München , 149-154 (2005)
A. Ostendorf, L. Engelbrecht, O. Meier, H. Haferkamp, Lasergelötete Stahl-Aluminium-Verbindungen für zukünftige Leichtbauapplikationen. Congress Intelligente Leichtbau Systeme7. September, Hildesheim (2005)
A. Ostendorf, S. Barcikowski, R. Sattari, T. Püster, H. Haferkamp, Intelligent low-cost system for fume control during laser material processing. International Laser Safety Conference (ILSC)7.-10. März, Marina del Ray , 269-278 (2005)
A. Ostendorf, P. Stippler, H. Becker, S. Czerner, P. Matteazzi, Gradient components made by micro sintering in combination with micro scale nano phased powders. International Symposium on Laser Precision Microfabrication (LPM)4.-8. April, Williamsburg , 196-200 (2005)
A. Ostendorf, O. Berend, T. Püster, M. Drygalla, M. Brose, Safety requirements for hand-held laser processing devices - current status of ISO 11553-2. International Laser Safety Conference (ILSC)7.-10. März, Marina del Ray , 260-268 (2005)
A. Ostendorf, P. Cordini, B. Block, H. Haferkamp, O. Meier, Neue Entwicklungen zum Laserstrahlschweißen von Schienenfahrzeugstrukturen aus Stahl. Fachtagung Fügen und Konstruieren im Schienenfahrzeugbau11.-12. Mai, Halle , 68-73 (2005)
A. Ostendorf, U. Stute, F. Meyer, Highly flexible fabrication of micro-sensor parts by uv-laser direct write thin-film structuring with high repetition 4 omega diode pumped solid state lasers. Conference on Lasers in Manufacturing (LiM)13.-16. Juni, München , 505-508 (2005)
A. Ostendorf, U. Stute, C. Büsching, Cutting of Flat Glass and Laminated Glass by Solid-State Lasers. Glass Processing Days17.-20. Juni, Tampere , 667-669 (2005)
A. Ostendorf, F. Korte, U. Klug, F. Siegel, G. Kamlage, B. N. Chichkov, Anwendungen von fs- und ps-Lasern in der Materialbearbeitung. Laser in der Elektronikproduktion und Feinwerktechnik (LEF)28. Februar-1. März, Bamberg , 83-92 (2005)
A. Ostendorf, U. Stute, F. Meyer, Highly flexible fabrication of micro-sensor parts by uv-laser direct write thin-film structuring with high repetition 4 omega diode pumped solid state lasers. International Conference of the European Society for Precision Engineering and Nanotechnology (euspen)8.-11. Mai, Montpellier , 113-116 (2005)
A. Ostendorf, O. Meier, H. Haferkamp, A. Bormann, Induction assisted laser beam welding of high strength steel sheets. International Congress on Applications of Lasers & Electro Optics (ICALEO)31. Oktober-3. November, Miami , 1008-1014 (2005)
S. Ostermeier, S. Czerner, H. Haferkamp, G. Hohenhoff, A. Ostendorf, C. Stukenborg-Colsmann, O. Meier, C. Hurschler, Implant Prototyping by Laser Cladding and Foaming. International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing (Euro-u Rapid)10.-12. Mai, Leipzig , B6/4 (2005)
S. Ostermeier, S. Czerner, A. Ostendorf, G. Hohenhoff, H. Haferkamp, C. Stukenborg-Colsmann, O. Meier, C. Hurschler, Rapid prototyping of articular metallic endoprostheses with adapted elasticity. Internationales SFB-Kolloquium Sonderforschungsbereich Biomedizintechnik Zukunftsfähige Bioresorbierbare und Permanente Implantate aus Metallischen und Keramischen Werkstoffen4.-5. November, Hannover , Posterbeitrag (2005)
S. Ostermeier, S. Czerner, H. Haferkamp, G. Hohenhoff, A. Ostendorf, C. Stukenborg-Colsmann, O. Meier, C. Hurschler, Laser-induced Titanium Foaming for Biomedical Applications. European Congress and Exhibition on Advanced Materials and Processes (Euromat)5.-9. September, Prag (2005)
R. Ostrowski, J. Walter, J. Marczak, S. Barcikowski, M. Strzelec, A. Ostendorf, Health risks caused by particulate emission during laser cleaning. Lasers in the Conversation of Artworks (LACONA)21.-25. September, Wien , 104 (2005)
A. Ovsianikov, B. N. Chichkov, Direct 3D laser writing by two-photon illumination. Digital Fabrication18.-22. September, Baltimore , 153 (2005)
A. Ovsianikov, B. N. Chichkov, Two-photon polymerization technique for bio-applications. Manufacturing Engineering and Materials Handling IMECE, ASME International Mechanical Engineering Congress and Exposition, Part A5.-11. November, Orlando , 105-108 (2005)
S. Paschko, J. Bunte, A. Ostendorf, A. von Busse, M. Fargas, Laser-Based Thermal Forming of Shape Memory Alloy Components. International Workshop on Thermal Forming (IWOTE)13.-14. April, Bremen , 55-62 (2005)
T. Pfister, L. Büttner, J. Czarske, In-process shape and roundness measurements at turning machines using a novel laser Doppler profile sensor. SPIE International Symposium on Laser Metrology14. Februar, Merida , 44-55 (2005)
T. Pfister, J. Czarske, J. Möbius, T. Müller-Wirts, Modulated external-cavity laser for highly resolved distance measurements. SPIE International Symposium on Laser Metrology14. Februar, Merida , 258-269 (2005)
C. Reinhardt, A. Ovsianikov, S. Passinger, B. N. Chichkov, Micro- and nanostructuring by two-photon illumination of photosensitive materials. Conference on Lasers in Manufacturing (LiM)13.-16. Juni, München , 867 (2005)
L. Richter, Fügen und Formen von Rohrgläsern mittels CO2-Laserstrahlung. Glastechnische Tagung23.-25. Mai, Würzburg (2005)
T. Ripken, G. Gerten, U. Oberheide, W. Ertmer, C. Ziltz, H. Lubatschowski, Fs-laser induced elasticity changes to improve presbyoptic lens accommodation. SPIE Photonics West: BiOS22.-27. Januar, San Jose , 278-287 (2005)
D. Ristau, T. Groß, Ion beam sputter coatings for laser technology. SPIE Optical Systems Design: Advances in Optical Thin Films13.-15. September, Jena , 315-326 (2005)
D. Ristau, Ionenstrahl-Sputtering. DGM Fachausschuss Dünne Schichten für industrielle Anwendungen28.-29. Juni, Wien (2005)
D. Ristau, Beschichtete Laserkomponenten: Herstellung, Charakterisierung und Optimierung. OTTI-Profiforum Schichten auf Glas5.-6. April, Würzburg (2005)
A. Rühl, D. Wandt, C. Fallnich, High power all-fiber mode-locked femtosecond Erbium oscillator at 1520 nm with a repetition rate of 108 MHz. Conference on Lasers and Electro-Optics Europe (CLEO®/Europe)12.-17. Juni, München , 520 (2005)
A. Rühl, D. Wandt, L. Engelbrecht, P. Weßels, H. Hundertmark, C. Fallnich, 1 nJ all-fiber 108 MHz mode-locked Erbium oscillator at 1.56 µm. Conference on Lasers and Electro-Optics (CLEO)22.-27. Mai, Baltimore , 1429-1431 (2005)
K. Samm, M. Terzi, J. Wulfsberg, A. Ostendorf, Experimentelle und simulatorische Untersuchungen zum laserunterstützten Massivumformen von metallischen Werkstoffen. Kolloquium Prozessskalierung im Rahmen des DFG Schwerpunktprogramms Prozessskalierung9.-10. November, Bremen , 21-39 (2005)
F. Sarto, A. Gatto, D. Ristau, S. Günster, M. Trovó, N. Kaiser, M. B. Danailov, A. Piegari, Deposition of robust multilayer mirror coatings for Storage Ring FEL lasing at 176 nm. SPIE Optical Systems Design: Advances in Optical Thin Films13.-15. September, Jena , 623-631 (2005)
R. Sattari, N. Bärsch, S. Barcikowski, M. Hustedt, A. Ostendorf, Continuous production and online-characterization of nanoparticles from ultrafast laser ablation and laser cracking. International Congress on Applications of Lasers & Electro Optics (ICALEO)31. Oktober-3. November, Miami , 375-384 (2005)
R. Sattari, S. Barcikowski, A. Ostendorf, Intelligent control of fumes during laser processing of non-metallic materials. Expo Laser18. November, Piacenza (2005)
C. Schmid, B. Boese, O. Meier, T. M. Wibbeke, Reparaturkonzepte mit handgeführten Lasersystemen an Fahrzeugkarosserien aus Stahl. Schweißen und Schneiden12.-14. September, Essen , 401-408 (2005)
A. Schoonderbeek, F. Siegel, N. Bärsch, F. Otte, U. Klug, U. Stute, Laser Processing of Materials in Micro System Technology. MikroSystemTechnik-Kongress10.-12. Oktober, Freiburg , 585-588 (2005)
S. Schumacher, W. Ertmer, M. Sander, A. Gröne, C. Döpke, H. Lubatschowski, Investigation of retinal damage during refractive eye surgery. SPIE Photonics West: BiOS22.-27. Januar, San Jose , 268-277 (2005)
F. Siegel, U. Klug, T. Temme, Einsatzpotential von Kurzpulslasern in der Mikromaterialbearbeitung und Mikrosystemtechnik. EFDS Workshop Rationelle Fertigung in der Mikrotechnik25. Oktober, Chemnitz , 1-11 (2005)
K. Starke, A. Melninkaitis, A. Zukauskas, V. Sirutkaitis, D. Ristau, Nonlinear absorption of ultrashort pulses in HR dielectric mirrors. SPIE Boulder Damage19.-21. September, Boulder (2005)
P. Stippler, S. Czerner, H. Becker, A. Ostendorf, P. Matteazzi, Technology improvements for micro scale laser sintering. SPIE Opto-Ireland4.-6. April, Dublin , 467-474 (2005)
P. Stippler, H. Becker, S. Czerner, A. Ostendorf, P. Matteazzi, Laser micro fabrication. Conference on Lasers in Manufacturing (LiM)13.-16. Juni, München , 849-853 (2005)
P. Stippler, H. Becker, S. Czerner, A. Ostendorf, P. Matteazzi, New possibilities by direct laser micro sintering for micro system technology components using nanophased powders. Advanced Manufacturing Systems and Technology (AMST)9.-10. Juni, Udine , 427-436 (2005)
P. Stippler, S. Czerner, P. Matteazzi, H. Becker, A. Ostendorf, Direct laser micro sintering using nanophased microscale powders. International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing (Euro-u Rapid)10.-12. Mai, Leipzig , A1/4 (2005)
U. Stute, U. Klug, B. Rahn, A. Ostendorf, Mass balancing and spring element manipulation of micromechanical silicon-gyrometers with ultrashort laser pulses. SPIE Microtechnologies: Smart Sensors, Actuators, and MEMS9. Mai, Sevilla , 153-161 (2005)
T. Temme, A. Ostendorf, U. Stute, Coincident multi-wavelength irradiation of polymers with UV and VUV laser. SPIE Photonics West: LASE22.-27. Januar, San Jose , 231-239 (2005)
T. Temme, S. Gollapudi, F. Otte, U. Stute, Wettability modification on polymer surfaces using UV laser radiation. International Symposium on Laser Precision Microfabrication (LPM)4.-8. April, Williamsburg , 171-176 (2005)
M. Trovó, F. Curbis, E. Allaria, S. Günster, G. Danailov, M. Marsi, B. De Ninno, S. Coreno, B. Diviacco, D. Ristau, Operation of the European FEL at elettra below 190nm: a tunable laser source for vuv spectroscopy. International Free Electron Laser Conference (FEL)21.-26. August, Stanford , THPP013 (2005)
J. Walter, S. Barcikowski, H. Haferkamp, Anwendung der Lasertechnik für Messungen von Strömungen und Transportprozessen in der Natur und im GWK. FZK-Kolloquium, Seegang, Küstenschutz und Offshorebauwerke8. März, Hannover , 141-148 (2005)
D. Wandt, F. Korte, M. Engelbrecht, J. Koch, C. Fallnich, Femtosecond Rapid Prototyping Technique for Patterning of Lithium Niobate Samples. Advanced Solid-State Lasers (ASSL)6.-9. Februar, Wien , Poster MB5 (2005)
D. Wandt, P. Adel, M. Engelbrecht, C. Fallnich, Four-wave-mixing suppression in Er3+-fiber amplifiers by backward pumping. Conference on Lasers and Electro-Optics (CLEO)22.-27. Mai, Baltimore , JWB44 (2005)
P. Weßels, M. Arlt, D. Wandt, C. Fallnich, Mode-locked Ytterbium-doped fiber ring laser with 16 nJ pulse energy. Conference on Lasers and Electro-Optics Europe (CLEO®/Europe)12.-17. Juni, München , 524 (2005)
R. Wilhelm, M. Frede, D. Kracht, D. Freiburg, C. Fallnich, High-power core-doped ceramic Nd:YAG laser. Conference on Lasers and Electro-Optics (CLEO)22.-27. Mai, Baltimore , 1082-1084 (2005)
R. Wilhelm, M. Frede, D. Kracht, D. Freiburg, C. Fallnich, Diode End-pumped Core-doped Ceramic Nd:YAG Laser. Advanced Solid-State Lasers (ASSL)6.-9. Februar, Wien , MA5 (2005)
A. von Busse, M. Fargas, J. Bunte, Optimization of laser transmission welding of polymers using thermography. Annual Technical Conference (ANTEC)1.-5. Mai, Boston , 166-170 (2005)